Page 1
OWNER’S MANUAL LED LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR MODELS E1951S E1951T E2251VR E2251VQ E2051S E2051T E2351VR E2351VQ E2251S E2251T E2351T www.lg.com...
TABLE OF CONTENTS CONTENTS ASSEMBLING AND PREPAR- PROPER POSTURE Proper posture for using the Monitor. Unpacking Parts and buttons LICENSES Setting up the Monitor - Attaching the Stand Base - Detaching the Stand Base - Detaching the Stand Body (Using the Wall mount) - Mounting on a table - Mounting on a wall...
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
ASSEMBLING AND PREPARING Parts and buttons Power Indicator Lighting On: Turned on Lighting Off: Turned off (Power Button) Button ("CUSTOMIZING SETTINGS" on page 13) E2251VR E2251VQ E1951S E2051S E2251S E2351VR E2351VQ DC-IN / HDMI D-SUB DC-IN / DVI-D D-SUB DC-IN /...
Page 5
To automatically adjust the screen, press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode E1951S / E1951T 1366 x 768 E2051S / E2051T 1600 x 900 E2251S / E2251T 1920 x 1080 E2251VR / E2251VQ...
ASSEMBLING AND PREPARING Setting up the Monitor Detaching the Stand Base Attaching the Stand Base Place the Monitor with the screen side down on a flat and cushioned surface. Place the Monitor with the screen side down on Turn the screw to the left, and then pull out the a flat and cushioned surface.
ASSEMBLING AND PREPARING Remove 4 screws and pull out the Stand Body Connect the AC-DC Adapter and Power Cord from the Monitor. to a wall outlet. DC-IN / Press Power button on the front switch of panel to turn the power on. CAUTION Mounting on a table Disconnect the power cord first, and then move...
ASSEMBLING AND PREPARING manual supplied with the Kensington security WARNING system or visit http://www.kensington.com . When you adjust the angle, do not hold the Connect the Kensington security system cable bottom of the Monitor frame as shown on between the Monitor and a table. the following illustration, as it may injure your fingers.
Page 9
If you use improper screws, the product might be damaged and drop from mounted position. In CAUTION this case, LG Electronics is not responsible for it. VESA compatible only with respect to screw Disconnect the power cord first before mounting interface dimensions and mounting moving or installing the Monitor.
D-SUB connection Transmits analog video from your PC to the Monitor. Connect the PC and the Monitor with the supplied D-sub 15 pin signal cable as shown in the following illustrations. E1951S E2051S E2251S DC-IN / D-SUB RGB OUT RGB OUT...
USING THE MONITOR SET DVI connection CAUTION Transmits the digital video signal from your PC to the Monitor. Connect the PC and the Monitor Connect the signal set with the DVI to HDMI cable as shown the input cable and tighten following illustrations.
USING THE MONITOR SET HDMI connection Self Image Setting Function Press the power button on the front panel to turn Transmits the digital video and audio signals from the power on. When monitor power is turned on, your PC or A/V to the Monitor. Connect the PC or the "Self Image Setting"...
Different menu items are enabled depending on the type of input signal and model. Menu SUPER+ DUAL AUTO VOLUME INPUT EXIT RESOLUTION E1951S / E2051S / E2251S E1951T / E2051T / E2251T / E2351T E2251VR / E2351VR (Analog/Digital) E2251VR / E2351VR (HDMI) E2251VQ / E2351VQ (Analog/Digital) E2251VQ / E2351VQ (HDMI)
CUSTOMIZING SETTINGS Customizing Settings Menu Settings MENU Press any button on the front of the Monitor to display the BRIGHTNESS ORIGINAL RATIO WIDE Monitor UP OSD menu. PRESET COLOR TEMP WARM PRESET Press the MENU button to display the options in the OSD menu.
Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG calculated these values by using “broadcast video signal”. LED Saving means how much power can be saved using a WLED Panel instead of CCFL panel.
CUSTOMIZING SETTINGS SUPER+ RESOLUTION Settings SUPER+ RESOLUTION Press any button on the front of the Monitor to display the Monitor UP OSD menu. NORMAL MEDIUM HIGH Press the SUPER+ RESOLUTION button to display the options in the OSD menu. EXIT Set the options by pressing ◄ or ► buttons.
CUSTOMIZING SETTINGS DUAL MONITOR Settings DUAL PACKAGE ► DUAL MONITOR Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu. Press the DUAL button to display the options in the OSD menu. EXTENDED CLONE Set the options by pressing ▼ and then ◄ and ► buttons.
TROUBLESHOOTING TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display y Check and see if the power cord is connected properly to the power connected? outlet. Is the power indicator light on? y Press the Power button.
Page 19
A Windows display driver is included on the CD. Or, you can also Have you installed the display driver? download the driver from our web site: http://www.lg.com. y Make sure to check if the video card supports Plug&Play function. The Audio function is not working Picture OK &...
SPECIFICATIONS SPECIFICATIONS E1951S E1951T Display Screen Type 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 47.0 cm Pixel Pitch 0.3 mm x 0.3 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 61 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (Automatic) Input Form...
Page 21
SPECIFICATIONS E2051S E2051T Display Screen Type 50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 50.8 cm Pixel Pitch 0.2766 mm x 0.2766 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)
Page 22
SPECIFICATIONS E2251S E2251T Display Screen Type 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating. Visible diagonal size: 54.6 cm Pixel Pitch 0.248 mm x 0.248 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (Automatic) Input Form...
Page 23
SPECIFICATIONS E2251VR E2251VQ Display Screen Type 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating. Visible diagonal size: 54.6 cm Pixel Pitch 0.248 mm x 0.248 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI)
Page 24
SPECIFICATIONS E2351T E2351VR E2351VQ Display Screen Type 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.4 cm Pixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency E2351T 56Hz to 75Hz (Automatic)
SPECIFICATIONS HDMI Timing E2251VR / E2251VQ / E2351VR / E2351VQ Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) 480P 31.50 576P 31.25 720P 37.50 720P 45.00 1080i 28.12 1080i 33.75 1080P 56.25 1080P 67.50 Indicator Mode LED Color On Mode Blue Sleep Mode Blinking Blue Off Mode...
Page 27
PROPER POSTURE PROPER POSTURE Proper posture for using the Monitor. Adjust the Monitor Adjust the location of and your posture the Monitor to avoid it to allow you to reflecting light. view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at...
Page 28
LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Page 29
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible ENERGY STAR is a set of power-saving place for future reference. guidelines issued by the U.S.Environmental The model and serial number of the SET is Protection Agency(EPA).