Advertisement
Machine Translated by Google
Is it a malfunction? If you think
Symptom
MD does not enter.
Even if I put in MD, it
comes out.
Noise occurs in the
MD playback sound,
or the sound skips.
The radio doesn't ring.
Automatic tuning is not
possible.
The radio sensitivity
is poor.
There is no sound
from either the front
speakers or the rear
speakers.
t † Warning Never disassemble or repair the machine by anyone other than a service person.
It may cause an accident, fire or electric shock.
others
Affection check
Do you have any of
these symptoms?
53
Origin
I already have a CD or MD and
am trying to insert a second one.
The direction to insert MD is different
The ambient temperature is extremely high.
There is condensation.
The mounting angle of this
machine exceeds 30 degrees.
The installation is bad.
Incomplete antenna connection.
weak signal.
The antenna is not fully extended.
Fedder
Level is FAD on one side.
ÿ Check the car audio you have been using for many years! ÿ
(
Due to the effects of heat, humidity, dust, etc. and the degree of use, the product may
deteriorate and break down, and in some cases, it may impair safety and lead to an accident.
• No sound or display is output even when the power switch is turned on. • The sound does not
disappear even when the power switch is turned off. • It smells strange or smokes. • Water or foreign
matter has entered the inside. • There are other abnormalities or malfunctions.
Placement
Remove the CD or MD that is included, and then insert
the next MD.
Insert it in the direction of c with the side with c facing
up.
Please use after lowering the temperature inside the car.
Please use it after leaving it for a while.
Install at an angle of 30 degrees or less.
Securely fix the machine.
Check the antenna connection.
Please tune in manually.
Please extend all the antennas.
Adjust the FAD level according to "To adjust the
Fedder
audio" (page 20). For 2 speakers, set to "0".
)
Discontinuation
To prevent breakdowns and
\ \
accidents, discontinue use and be sure to sell
Please contact the shop.
Advertisement
