Philips 43PFL5602 User Manual page 28

Y Y ou may adjust picture quality and enhancement settings using Pixel
Plus Ultra HD and Advanced settings sub menus.
Auto picture Dynamic contrast
Backlight Color enhancement
Contrast Black stretch
Brightness 120 PMR
Color 4K UHD Upscaling
Tint Macro Dimming
Sharpness Noise reduction
Pixel Plus Ultra HD MPEG artifact reduction
Advanced settings
Picture format
Mode selection
Horizontal position
Vertical position
To select the desired setting, then press OK
Dynamic
(Off, Minimum, Medium and Maximum)
contrast
To set color enhancement to off
Off
Color
enhancement
On To make colors more vivid and bright
Black To select the desired setting, then press OK
stretch (Off, Minimum, Medium and Maximum)
Off To set 120 PMR to Off
120 PMR
On To make the video appear smoother
4K UHD To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Upscaling
To select the desired setting, then press OK
Macro
(Off, Minimum, Medium and Maximum)
Dimming
Noise To select the desired setting, then press OK
reduction (Off, Minimum, Medium and Maximum)
MPEG
To select the desired setting, then press OK
artifact
(Off, Minimum, Medium and Maximum)
reduction
Auto picture
Backlight
Off
Contrast
Minimum
Brightness
Medium
Color
Maximum
Tint
Sharpness
Pixel Plus Ultra HD
Advanced settings
Picture format
Mode selection
Horizontal position
Vertical position
alignment
Custom color
management
HDR mode
Gamma
Blue stretch
Film mode
•
Mode selection is available only if
–The external input modes are selected HDMI 1, HDMI 2 or HDMI 3.
–The connected HDMI device is outputting a video signal.
Color alignment
Custom color management
HDR mode
Gamma
Blue stretch
Film mode
To set the color temperature to Personal,
Cool, Normal and Warm.
Mode
When you adjust the following settings,
Personal will be set automatically.
Cursor
To decrease red
Red gain
contrast
To decrease green
Green gain
Color
contrast
To decrease blue
Blue gain
contrast
To decrease red
Red offset
brightness
To decrease green
Green offset
brightness
To decrease blue
Blue offset
brightness
To select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
Cursor
To rotate only
Tint selected color tint in
clockwise direction
To decrease color
Saturation with only selected
color
To decrease
Brightness brightness with only
selected color
To set HDR mode to off
Off
Automatically switches to a dedicated
picture quality setting when receiving HDR
Auto
signal
To select the desired setting, then press OK
(Very Dark Room, Dark Room, Normal, Bright Room and
Very Bright Room)
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Off To set film mode to off
To optimize the picture recorded by the
Auto
original film
Note(s)
28
.
English
Mode
Red gain
Green gain
Blue gain
Red offset
Green offset
Blue offset
Cursor
To increase red
contrast
To increase green
contrast
To increase blue
contrast
To increase red
brightness
To increase green
brightness
To increase blue
brightness
Cursor
To rotate only
selected color tint in
counterclockwise
direction
To increase color
with only selected
color
To increase
brightness with only
selected color
Continued on next page.