GE GARETT User Manual page 13

Instructions for use
1. Make sure the device is charged before using it for the first time.
2. If there is no response to the power button, connect the device for
charging.
3. When the device is discharged, it takes about 3 hours to fully charge
the battery.
4. When charging, the LED is red, and when it is fully charged, the colour
of the LED will turn blue.
Note: The device is protected against starting it while charging. It notifies
you when the battery is low by means of voice message.
5. To turn on the device, press and hold ON/OFF button for about 3
seconds. The switching-on will be signalled with voice message and the
massager will start the operation in the default mode - Integrated mode.
6. After turning on the device, you can pair it with your phone to play
music:
* Turn on Bluetooth connectivity on your phone and make sure the
massager is turned on.
* Open your phone's Bluetooth settings, search for the device named
IF-999 and pair it with your phone.
* After successful pairing you will hear a short beep.
* Double-clicking the ON/OFF button activates the Bluetooth music
playback function. Double clicking again serves as PAUSE/START of
the music being played.
7. Pressing the ON/OFF button once will change the operating mode
(5 available) to suit your individual needs. The commencement of the
operating mode begins with messages.
8. You can control the device by hand movement thanks to the built-in
infrared hand motion sensor.
Switching the compression
massage modes
Changing the compression
massage intensity
- 5 -