Makita BFT080F Instruction Manual
Hide thumbs
Also See for BFT080F:
- Instruction manual (77 pages) ,
- Instructions manual (57 pages) ,
- Technical information (15 pages)
Related Manuals for Makita BFT080F
Summary of Contents for Makita BFT080F
- Page 1 INSTRUCTION MANUAL Cordless Screwdriver BFT020F BFT021F BFT040F BFT042F BFT080F BFT081F BFT122F BFT123F 004242 IMPORTANT: Read Before Using.
-
Page 2: Specifications
Model BFT020F, BFT021F, BFT040F, BFT042F, exposure in the actual conditions of use (taking BFT080F, BFT081F, BFT122F account of all parts of the operating cycle such as Sound pressure level (L ) : 70 dB(A) or less... -
Page 3: General Power Tool Safety Warnings
Electrical safety Makita Corporation responsible Power tool plugs must match the outlet. Never manufacturer declare that the following Makita modify the plug in any way. Do not use any machine(s): adapter plugs with earthed (grounded) power Designation of Machine: tools. Unmodified plugs and matching outlets will Cordless Screwdriver reduce risk of electric shock. -
Page 4: Cordless Screwdriver Safety Warnings
15. Dress properly. Do not wear loose clothing or objects, that can make a connection from one jewellery. Keep your hair, clothing, and gloves terminal another. Shorting the battery away from moving parts. Loose clothes, jewellery terminals together may cause burns or a fire. or long hair can be caught in moving parts. -
Page 5: Functional Description
Always switch off the tool before insertion or • attention right away. It may result in loss of removal of the battery cartridge. your eyesight. For Models BFT020F, BFT021F, BFT040F, BFT080F, Do not short the battery cartridge: BFT122F Do not touch the terminals with any conductive material. - Page 6 If the cartridge does not slide in easily, it before use. is not being inserted correctly. NOTE: Refresh charging Please contact Makita Authorized Service Center if • the warning lamp of the battery cartridge does not Refreshing battery adapter (optional accessory) can light up when using or charging.
-
Page 7: Led Indicator
Lighting up the lamps 1. Front lamp 004247 CAUTION: Do not look in the light or see the source of light • directly. Pull the switch trigger to light up the lamp. The lamp keeps on lighting while the switch trigger is being pulled. The light automatically goes out 10 seconds after the switch trigger is released. - Page 8 Status of the LED indicator/beeper Function Status Action to be taken LED indicator Beeper This function works when the tool has reached the preset fastening torque and normal Auto-stop fastening tightening has been completed. This helps overtightening to be avoided. Lights up in green for approximately one second.
- Page 9 Adjusting the fastening torque ASSEMBLY 1. Adjusting ring CAUTION: 2. Ring Always be sure that the tool is switched off and the • battery cartridge is removed before carrying out any work on the tool. Installing or removing driver bit or socket bit 004248 When you wish to drive machine screws, wood screws, hex bolts, etc.
-
Page 10: Operation
Screwdriving operation Torque 008232 004249 BFT080F Range of fastening capacity Place the point of the driver bit in the screw head and apply pressure to the tool. Then switch the tool on. When the clutch cuts in, the motor will stop automatically. -
Page 11: Maintenance
If you need any assistance for more details regarding charged battery cartridge is used. these accessories, ask your local Makita Service Center. MAINTENANCE Makita genuine battery and charger •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884500D222...