Table of Contents
Advertisement
2
Installation
2.1 Space Requirements
– Installation plate thickness: 1.5 - 7.5 mm (0.06 - 0.3 inch)
– Space requirements when installing the operator terminal:
168 mm
(6.61 inch)
50 mm
(2.0 inch)
Caution
The openings on the enclosure are for air convection. Do not cover these
openings.
2.2 Installation Process
1. Unpack and check the delivery. If damage is found, notify the supplier
Note:
Place the operator terminal on a stable surface during installation.
Dropping it or letting it fall may cause damage.
2. Place the panel cut out where the operator terminal is to be situated, draw along
the outer sides of the holes and cut according to the markings. If access to the
text strip is needed, add extra space in the lower left corner.
Mitsubishi Electric, MA00817
100 mm
(4.0 inch)
50 mm
(2.0 inch)
100 mm
(4.0 inch)
275 mm
(10.83 inch)
Panel cut out 240 x 130 mm
(9.45 x 5.12 inch)
x 6
For text strip
(0.28 inch)
13.0 mm
(0.51 inch)
100 mm
(4.0 inch)
57.3 mm
(2.26 inch)
7.0 mm
Installation
.
7
Advertisement
Table of Contents
