D-Link DIR-615 User Manual page 30

Section 4 - Configuration
Ethernet
MAC address: The default MAC address is set to the Internet port's physical interface
MAC address on the router. You can edit that address manually here.
Clone MAC Toggle this switch to clone the MAC address of the device you are
address of your
using to access the web UI. Note that no two MAC address within the
NIC:
same subnet can be the same.
Restore Default Click here to restore your router's default MAC address.
MAC Address:
MTU: Specify the Maximum Transmission Unit of your Internet connection.
You may need to change the MTU for optimal performance with your
ISP. The default setting is 1500.
IPv4
IP address: Specify the IP address provided by your ISP.
Netmask: Specify the subnet mask provided by your ISP.
Gateway IP Specify the default gateway address provided by your ISP.
address:
Primary DNS
Specify the primary DNS server IP address assigned by your ISP.
server:
Secondary DNS Specify the secondary DNS server IP address assigned by your ISP.
server:
Click Apply when you are done.
D-Link DIR-615 User Manual
Static IPv4 (cont)
26