Table of Contents
Advertisement
Error Display Messages
USB (MP3/WMA)
34
A USB device is not connected or the connected
device cannot be recognized.
a
Use a USB memory that is suitable for this
unit.
No playable files exist.
An unsupported USB device is connected.
a
Use a USB memory that is suitable for this
unit.
a
Record files that can be played back on this
unit onto the USB memory.
A USB device that exceeds the current capac-
ity that can be supplied is connected. For some
reason, an over-current was detected.
a
Use a USB memory that has a consumption
current of less than 1 A.
a
Switch the Source, and select the USB (MP3/
WMA) mode again.
a
Switch the power off/on, and select the USB
(MP3/WMA) mode again.
a
Check that the USB connector section is not dirty,
and that there is no foreign objects.
No operation by some cause
a
Turn off the power and turn on the power
again, or turn the key to the ACC OFF posi-
tion and turn the key to ACC ON position
again. If this does not solve the problem,
unplug the power cord and plug it in again.
In case the unit is still out of order,
your dealership.
The player cannot read the file you are trying to
play for some reason. (File recorded in an unsup-
ported file system, compression scheme, data
format, file name extension, damaged data, etc.)
a
Confirm that the USB extension cable is
firmly connected, and reconnect if not.
Select a file that the player can read. Check
the type of data stored in the USB memory.
Format the USB memory if necessary.
The WMA file can be copyrighted.
a
The file protected by copyright is not play-
able.
consult
Advertisement
Table of Contents
