Page 1
This device can be used indoors only when not jamming lawful radio stations and when protected from interference. Declaration of Conformity Hereby, Sharp Telecommunications of Europe Limited, declares that this WX-T930 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Introduction • Screen layout may differ from that illustrated in this user guide. Congratulations on your new HSDPA WX-T930 phone. • The information described in this user guide is About This User Guide subject to change without notice. This user guide is carefully designed to help you learn •...
Page 3
® Powered by JBlend™ Copyright is trademarks and/or registered 1997-2008 Aplix Corporation. All rights trademarks of Nuance Communications, reserved. Inc. and/or its affiliates in the United JBlend and all JBlend-based trademarks States and/or other countries. and logos are trademarks or registered trademarks of Aplix Corporation in Japan XT9 Mobile Interface is licensed under and other countries.
Page 6
Useful Functions and Services • Your own ringtones and ring video clips. You can use Your phone offers you the following features: sound or video clip files as a ringtone or ring video clip. • Video Calling. You can talk while viewing images of •...
Contents Introduction ..........1 Voice Call/Video Calling Functions ..32 List of Menu Functions ....... 8 Entering Characters ........40 Your Phone ..........10 Changing the Input Language ....40 Changing the Input Method ....... 41 Optional Accessories ......... 10 User Dictionary .......... 45 Getting Started ..........
Page 8
Messages ........... 77 Safety Precautions and Conditions of SMS ............77 Use ............166 Long SMS ..........77 Conditions of Use ........166 MMS ............77 Mobile Light LED Properties ....167 Email ............77 Environment ..........169 FET Mobile Internet ........89 Precautions Concerning Vehicle Use ..170 Navigating a WAP or Web Page ....
List of Menu Functions WX-T930 functions are listed below. See relevant page for details of each function. The menu’s corresponding number is used for shortcuts. For details, see page 26. 1 Java™ 3 Organiser 4 Messages 6 Gallery 1 Java™ Gallery p.
Page 10
(Tab 2: Call/Video 10 SIM 8 Call Manager 9 Settings p. 124 Call) Application 1 Phonebook p. 49 (Tab 1: Phone 1 Voicemail & p. 139 Settings) 2 Add New p. 49 11 Call Log Diverts 1 Profiles p. 125 3 Call Voicemail –...
Your Phone Please check the following carefully. Your phone should come complete with: • HSDPA/3G (UMTS)/GSM 900/1800/1900 GPRS phone • Rechargeable Li-ion Battery • AC Charger • Stereo Handsfree • Chinese User Guide Optional Accessories • Li-ion Spare Battery • Cigarette Lighter Charger •...
Page 14
1. Light Sensor 9. Send/Redial Key: D 2. Earpiece Makes voice calls or accepts calls, and displays the 3. Main Display call logs in stand-by. 4. Sub Camera (Internal Camera) 10. Voicemail Key: G 5. Navigation Keys (Arrow Keys): abcd Long press to connect to the Voicemail centre.
Page 15
14. Video Telephony Key: T 21. Microphone Makes video callings or accepts calls, and displays 22. External Display the call logs in stand-by. 23. Small Light: 15. Clear/Back Key: U Flashes when an incoming call or a new message is Clears the characters before the cursor, returns to received or missed, if Event Light (p.
Page 16
28. Infrared Port: Sends and receives data via infrared. 29. Speaker 30. Battery Cover 31. Camera (External Camera) 32. Built-in Aerial: Warning: Do not cover the hinge area of the phone with your hand when in use as this may interfere with the performance of the built-in aerial.
Inserting/Removing the SIM/USIM Hold the battery so that the metal contacts of the battery are facing down, slide the guides on the top Card and the Battery of the battery into the battery slots , and then Slide off the battery cover ( insert it Slide the SIM/USIM card into the SIM/USIM holder...
Charging the Battery Battery Disposal The device is battery-powered. In order to protect the You must charge the battery for at least XXX minutes environment, please read the following points before using your phone for the first time. concerning battery disposal: Using the Charger •...
Page 19
Note Note • Charging time may vary depending on the state of the • Do not use any non-approved chargers as they may battery and other conditions. (See “Battery” on damage your phone and invalidate any warranties, page 167.) see “Battery” on page 167 for details. •...
Inserting/Removing the Memory Card Battery Level Indicator The current battery level is displayed in the upper right Note of the screen. • Make sure that the phone is turned off before Low Battery during Use inserting/removing the memory card. When the battery is running low, an alarm will sound •...
Connecting the Handsfree Kit Insert the memory card until it clicks. (To remove the memory card, push the memory card until it Open the connector cover. clicks.) Connect the handsfree kit. Close the cover. • You see the following indicators when the memory card is in use: : Appears when the card is inserted.
Turning Your Phone On and Off To Copy All Phonebook Entries from the SIM/ USIM Card To turn the power on or off, long press F for When you insert the SIM/USIM card into your phone approximately 2 seconds. for the first time and start the Phonebook application, To Enter the PIN Code you are asked whether you wish to copy Phonebook If the PIN (Personal Identification Number) code is...
Display Indicators (Main Display) : Strength of received signal/Service out of range Indicator area : HSDPA : 3G (UMTS)/GPRS : GSM : GPRS enabled : Roaming outside network Connection to the server [established/ communicating] Voice call [incoming/in progress] : Video calling communication mode enabled [voice/video/voice and video] Alerts [text message and multimedia message/Email]...
Page 24
: WAP/OTA provisioning alerts [WAP Connection status alert/OTA provisioning alert/WAP and [USB cable [stand-by/exchanging OTA provisioning alerts] information]/IrDA setting [stand-by/ Voicemail message alert exchanging information]/Bluetooth “Show Secret Data” set to “On” wireless setting [stand-by/exchanging Function Lock enabled information/talking with the Bluetooth Keypad Lock enabled headset/Hide my phone/playing back 23.
Display Indicators (External Display) Sound file being played Streaming Stopwatch/countdown timer OBEX data incoming Voice Recorder activated Status Indicators Battery level [sufficiently charged/ charging recommended/charging required/empty] Clock :Strength of received signal/Service out of range : Missed events Voice call incoming Call in progress Alerts [messages/Delivery Report] Alarm enabled [Daily alarm/Schedule...
Navigating Functions The basic operations are as follows. To Access the Main Menu Press B in stand-by. Main Menu To Select a Menu Item Move the cursor using a, All applications are accessed from the Main menu. (indicated in quotation b, c, d and press B to marks in this user guide) select.
Shortcut Keys The Organiser and Settings menus have tabs. The operations for selecting an item in these menus are You can access menus by pressing B and digit keys for as follows. the corresponding number on the Main menu. For numbers 10 to 12, press B and P (10), Q (11) or To Access the Desired Tab Press c or d.
Shortcuts To Use the Shortcut Key Your phone has a shortcut function (press E in Press E in stand-by. stand-by) which enables you to access the desired menu Select the desired item or number. quickly. The default shortcuts are as follows (shortcuts To Customise the Assigned Shortcuts assigned to G-O can be customised): Press E in stand-by.
Motion Control Before Using Motion Control Make sure that the phone is in the following status. Your phone has a sensor which can detect motion or 1. The Display is Turned On changes in direction. You can change the picture being This function is not available when the display is turned displayed or enlarge or shrink the contents of the screen off.
Page 30
Motion Control Functions 3. Select a Sound File or Picture Select the previous or next picture, sound or document 1. Change the Direction of the Screen file by shaking the phone once to the left or to the right. When Document Viewer You can also change the page being viewed.
Page 31
4. Quick Silent Showing Secret Data Temporarily Quickly silence your phone (the ringtone, alarm tone, The hidden data in the Phonebook or Calendar can be etc.) just by turning the phone over. displayed temporarily by shaking the phone. Enter the handset code in stand-by. Shake the phone to the left or right.
Page 32
Practicing the Action (M 9-7-3) • When using motion control, make sure to hold on to the phone firmly and not to shake the phone too You can practice and confirm the actions set in the strongly. Confirm that there is enough space around motion control settings.
Voice Call/Video Calling International Calls Long press Q until a + (international dialling Functions prefix) sign is displayed. Making a Voice Call Enter the country code, followed by the area code (without the leading zero) and the phone number, Enter the area code and the phone number you wish and press D to dial.
Page 34
Speed Dialling Answering a Voice Call The digit keys (G to O) can be used for speed dial. When an incoming call is detected, the phone rings. Up to 8 phone numbers from the Phonebook memory Press D or B to answer the call. (Handset and SIM/USIM) can be assigned to H to Or press any key except F, U, [Options] or O.
Page 35
Rejecting an Incoming Call Putting a Call on Hold This function allows you to manage two calls at the Press [Options] and select “Reject” while the phone same time. If you wish to make another call while you is ringing to reject a call you do not wish to answer. are talking to someone, you can put the current call on Letting the Caller Know You are Unavailable hold to call someone else.
Page 36
Accessing SMS/MMS Menu during a Call Note • You need to set “Call Waiting” to “On” if you wish During a call, press [Options] and select to use the Call Waiting service (p. 146). “Messages”. • Call Waiting service may not be available on all The following options are available: “Create networks.
Page 37
To End the Call with a Conference Call Participant Note • The conference call service may not be available on During a conference call, highlight the person that all networks. Contact your service provider for more you wish to disconnect from the conference call. information.
Page 38
Making a Video Calling Answering a Video Calling When an incoming call is detected, the phone rings. Note Press D to answer the call with video, or press B • Video callings can only be made and received if both or [Options] and select “Hide Picture”...
Page 39
In Call Menu (Video Calling) Select “Internal Camera”, “External Camera” or “Alternative Image”. Muting the Microphone “Internal Camera”: The image through the sub During a video calling, press [Options] and select camera is displayed and sent “Mute Microphone”. to the receiver. To use the microphone again, press [Options] and “External Camera”: The image through the...
Page 40
Video Calling Settings Select “Always On”, “Always Off” or “As Normal Setting”. To Adjust the Quality of the Incoming or Outgoing When “Always On” is selected, the backlight will Image always be on during a video calling. You can adjust the quality of the called party’s or When “As Normal Setting”...
Entering Characters Long press the following keys to: Enter 1-9 numbers. When entering characters to create Phonebook entries, Enter space in Numeric mode or to text messages or multimedia messages, etc., press the enter 0 in other modes. corresponding keys. Shift between multi-tap and XT9 In multi-tap input method, press each key until the mode.
Changing the Input Method English/XT9 mode On the text entry screen, press [Options] and select “Input Method”. Select the input method you wish to use. Input Input Input English/Multi-tap mode Input Language Language Language Method = Traditional = Simplified = English Chinese Chinese XT9 Abc...
Page 43
XT9 English Mode XT9 BoPoMoFo and XT9 Stroke Mode In XT9 BoPoMoFo and XT9 Stroke mode, keys are as Using XT9 English Mode follows. XT9 text input method is a shortcut to enter text easily XT9 BoPoMoFo and XT9 Stroke Mode Keys and quickly.
Page 44
Long press to input corresponding Chinese character displayed in the candidate field. Long press to display the Input Language screen. Changing the Input Method between Stroke and BoPoMoFo See “Changing the Input Method” on page 41. Entering Characters...
Page 45
Using BoPoMoFo Input Mode Long press K if the desired character is displayed. Input field Long press the corresponding numeric Repeat steps 1 and 2 to complete messages. key to select the desired character directly from • When the cursor is placed after one character, the the candidate field.
User Dictionary Using Stroke Mode The following is an example of entering “ ”. You can create your own word list for alphabet text and Change the input mode to XT9 Stroke mode. XT9 Chinese input. Press I G J to display English User Dictionary the corresponding stroke for Note...
Page 47
To Delete a Word To Edit a Word in the List On the text entry screen, press [Options] and select On the text entry screen, press [Options] and select “User Dictionary”. “Chinese User Dictionary”. Highlight the desired word. Highlight the desired word. Press [Options] and select “Delete”.
Entering Pictograms and Symbols Using the Notepad You can use the phrases registered in the Notepad when On the text entry screen, press [Options] and select entering characters. “Add Symbol”. For details on creating a Notepad entry, see “Adding When “Input Language” is set to “English”, the half Phrases to the Notepad”...
Copying, Cutting and Pasting Text Insert Phonebook Entries You can insert the entries registered in Phonebook On the text entry screen, press [Options] and select when entering characters. “Advanced”. For details on creating the Phonebook entries, see “Call Select “Copy” or “Cut”. Manager”...
Call Manager (M 8) Registering a New Entry (M 8-2) → “Call Manager” “Add New” You can store the phone numbers and Email addresses If you select the “Choice” option for the memory to be of your friends, family and colleagues in the used, the selection is between “To Handset”...
Page 51
Saving an Unregistered Number Finding a Name (M 8-8-5) After a call ends, you can have the confirmation screen → “Call Manager” “Phonebook” asking you if you wish to register the number to the Enter the first few letters of the name. Phonebook.
Page 52
Selecting the Search Mode Dialling a Service Phone Number (M 8-8-4) (M 8-9) Certain SIM/USIM cards contain service phone → → “Call Manager” “Phonebook Settings” “Search numbers that can be dialled. Contact your SIM/USIM Mode” card vendor for more information. On the Phonebook For Simplified Chinese, select “Character Search”, screen, “Service Dialling No.”...
Sending a Message from the To Add Recipients to a Group Up to 20 recipients can be registered in each list. Phonebook → “Call Manager” “Message Groups” → “Call Manager” “Phonebook” Select the desired group name. Select the desired entry including the phone number Select “Assign New Entry”.
Page 54
Editing Phonebook Entries Assigning a Ringtone or a Ring Video Clip to Each Entry → “Call Manager” “Phonebook” → “Call Manager” “Phonebook” Highlight the entry you wish to edit. Highlight the desired entry. Press [Options] and select “Edit”. Press [Options] and select “Edit”. Modify the information.
Page 55
Deleting Phonebook Entries Managing the Phonebook Deleting All Phonebook Entries Copying Phonebook Entries between SIM/ USIM Card and Handset → → “Call Manager” “Advanced” “Delete All” → → “Call Manager” “Advanced” “Copy All Select from “Handset Entries”, “SIM Entries” or Entries”...
Page 56
Manage Groups (M 8-4) Sending a Phonebook Entry → “Call Manager” “Phonebook” Different ringtones can be set for each group. If you do not change a group ringtone, the ringtone assigned in Highlight the desired entry. the Profiles menu is used. Press [Options] and select “Send Phonebook”.
Page 57
Speed Dial List (M 8-6) To Change the Speed Dial List or the Speed Mail List You can set a maximum of 8 phone numbers in the → Speed Dial list (p. 33). “Call Manager” “Speed Dial List” Select the entry you wish to change. Setting Phonebook Entries in the Speed Dial List Press [Options] and select “Change”.
Multimedia (M 7) • Pressing H changes the size of the video display in the following order: Normal Size, Enlarge, Full screen, Widescreen and Cinema Screen. Note that Video Player (M 7-1) this does not change the Display Size setting. Video Player supports MPEG-4, 3GPP and H.264 •...
Page 59
Adding a File to the Playlist Adding a New Playlist You can add files to a playlist. You can create a playlist and register desired files in it. → → → → “Multimedia” “Video Player” “My Videos” “Multimedia” “Video Player” “My Videos”...
Page 60
Settings (M 7-1-5) “Normal Settings”: Works with the main You can select a play mode for “Playback Pattern”, backlight setting (p. 129). “Backlight”, “AV Mode”, “Display Size”, “Sound • “AV Mode” Effects” and “Web Link Setting” when playing back Various AV modes are available, including video clip files.
Page 61
Music Player (M 7-3) Downloading Video Clip Files (M 7-1-4) → → “Multimedia” “Video Player” “Download Music Player supports MP3, MPEG-4 and 3GPP Videos” format sound files. You can access other menus while The video clip file download site is displayed. listening to sound files.
Page 62
Select the desired sound file. • When listening to music using an A2DP compatible Bluetooth handsfree device, play back the file from To pause playback, press B. Music Player. To stop playback, press F and go back to • To select the playback pattern, press [Options] and stand-by, then press F again.
Page 63
To Play Back or Resume Playback of the Last File Adding a File to the Playlist You can add files to a playlist. → “Multimedia” “Music Player” → → → “Multimedia” “Music Player” “My Music” Select “Last Played Music”. “All Music” “Currently Playing”...
Page 64
Adding a New Playlist You can create your own playlist, storing and managing your favourite tracks and the order of tracks. → → → “Multimedia” “Music Player” “My Music” “Playlists” Press [Options] and select “Add New Playlist”. Enter the desired playlist name. Note •...
Camera (M 5) Taking Pictures → “Camera” “Still Camera” Your phone has a built-in digital camera that allows you Press B to take the picture. to take pictures and record video clips wherever you are. This section starts with basic functions and The shutter sounds and the still image of the taken operational procedures to take, save and send pictures picture is displayed.
For “As Message” • You can activate the camera by long pressing X in For details, see “MMS” on page 77. stand-by. For “Bluetooth” • You can lock the focus by pressing D before taking For details, see “Bluetooth” on page 152. a picture or recording a video clip.
Common Functions in the Still and Switching the Focus Mode → → → Video Camera Modes “Camera” “Still Camera” [Options] → “Shooting Settings” “Focus” Using the Digital Zoom Function → → → “Camera” “Video Camera” [Options] → “Record Settings” “Focus” To Adjust the Zooming Ratio Select the desired option.
Page 68
Selecting the Picture or Video Quality Select “10sec”, “5sec” or “2sec”. Select the appropriate option. When you select one of these options, the → → → “Camera” “Still Camera” [Options] “Picture corresponding indicator (“ ”, “ ”, or “ ”) is Quality”...
Page 69
Auto Save Mobile Light You can set the phone to save pictures and video clips To Change the Mobile Light Mode automatically. Set the mobile light according to your purpose. → → → “Camera” “Still Camera” [Options] → → → “Camera”...
Page 70
Switching between the Internal and External Common Shortcut Keys Cameras If multiple options exist, they switch each time you You can also switch between the internal (sub) camera press each of the following keys. and external (main) camera. → → →...
Using Face Auto Focus Note • The “Switches the display modes” option is available Faces of up to 5 people can be focused on automatically in “Preview” before you save a video clip. See using this function. “Recording Video Clips” on page 65. →...
Page 72
Continuous Shoot Taking Panorama Pictures There are various modes for taking continuous shots. → → → “Camera” “Still Camera” [Options] → → → → “Modes” “Panorama” “Camera” “Still Camera” [Options] → “Modes” “Continuous Shoot” Select “On” and press B. Select the desired mode. Move the phone slowly to keep the + mark aligned The following continuous shoot modes are with the assisting lines, and press B.
Page 73
To Set the AE-Lock Note When this setting is enabled, the exposure setting is • When “Long Exposure” is set to “On” and is used fixed for the same brightness level. during the day or in bright surroundings, the taken picture may become over exposed and stark white.
Page 74
Camera Effects Selecting the Scene You can select from various camera effects. You can select the appropriate mode by scene when you take a picture. → → → “Camera” “Still Camera” [Options] → → → → “Modes” “Camera Effects” “Camera” “Still Camera”...
Page 75
Selecting the White Balance Saving a Photo in the Background → → → → → → “Camera” “Still Camera” [Options] “Camera” “Still Camera” [Options] → → “Shooting Settings” “White Balance” “Settings” “Background Saving” Select from “Auto”, “Daylight”, “Cloud/Shade”, Select “On” or “Off”. “Tungsten”...
Functions in Video Camera Mode Setting a Function for the Send Key You can set the method to send a taken picture when C Selecting the Display Size is pressed. → → → “Camera” “Video Camera” [Options] → → → “Camera”...
Page 77
Note • If you select “For Message” for the recording time, • “Microphone” is also available from the following the file size is limited depending on the service procedure: → provider. Therefore, the quality is also limited for the “Camera” “Video Camera Settings”...
Messages (M 4) Long SMS WX-T930 supports Long SMS, which allows you to Your phone allows you to send and receive text send text messages up to 335 Chinese or 765 English messages, multimedia messages and Emails. It is characters. If the number of characters in a message compatible with most POP3 Email providers.
Page 79
Creating a New Message • To add a subject, highlight the subject field and press B. Then enter the subject in the subject (SMS/MMS) entry screen and press B. → → “Messages” “Create Message” “Create Place the cursor in the message field. Message”...
Page 80
To Add a Slide Show Select the desired option and then select the desired file. Perform steps 1 to 5 in “Creating a New Message” on page 78. If you wish to attach pictures, sounds or video clips that are saved, select “Saved Pictures”, “Saved Press [Options] and select “Add Slide”.
Page 81
Using the Sending Options Note You can use the message sending options for each type • The current message size displayed while you are of message. creating the message is an approximation. • If a message cannot be sent for some reason, the Press [Options] and select “Messaging Settings”.
Page 82
Sending a Message in the Drafts Box Storing the Phone Number of a Sender in the Phonebook (SMS/MMS) → → (SMS/MMS) “Messages” “Message” “Drafts” → → “Messages” “Message” “Inbox” (Email) → → (Email) “Messages” “Email” “Drafts” → → “Messages” “Email” “Inbox”...
Page 83
Downloading a Single MMS Forwarding a Message → → “Messages” “Message” “Inbox” (SMS/MMS) → → Select a folder. “Messages” “Message” “Inbox” (Email) Highlight the message alert ( ) you wish to → → “Messages” “Email” “Inbox” download. Select a folder. Press [Options] and select “Download”.
Page 84
Cell Broadcasts (M 4-5) Setting Languages for Cell Broadcast Messages You can receive cell broadcast messages or general → → → messages such as weather forecasts and traffic reports. “Messages” “Cell Broadcasts” “Settings” “Language” This information is broadcast to subscribers in certain network areas.
Page 85
Area Info (M 4-6) • “Auto Delete”: Sets whether to delete the oldest message The Area Info is the message information that operators automatically when the Inbox, Sent or Both send to subscribers in certain areas. (Inbox and Sent) is full. When you receive Area Info, the message (area code) is •...
Page 86
SMS Settings • “Connection Type”: Sets the preferred connection type (“GPRS → → “Messages” “Messaging Settings” Preferred”, “CSD Preferred”). “SMS Settings” Select the item you wish to set up. MMS Settings • “Delivery Report”: → → “Messages” “Messaging Settings” Enables or disables Delivery Report request. “MMS Settings”...
Page 87
• “Roaming Download”: • “Expiry Time”: This indicates the number of days and hours for Controls the message download timing when which a message you send may remain roaming outside of your network. undelivered to the message recipient. During this “Always Download”: Downloads messages period, the message service centre will immediately from the...
Page 88
Email Settings • “Hide Number”: Sets whether to show or hide the sender’s address. → → “Messages” “Messaging Settings” “Email Settings” • “Delivery Time” (“Immediate”, “1 hour”, “12 hours”, “1 day”, “1 week”): To Set an Email Account Sets the time the message is delivered after Select “Email Accounts”...
Page 89
To Activate the Email Account Profile Select “Email Accounts”. Select the desired profile you wish to activate. Speed Mail The Speed Mail function allows you to initiate messaging from the stand-by screen faster, with fewer keys to press. The digit keys (H to O) can be used for speed mail. A total of 8 data items can be assigned to these keys.
FET Mobile Internet (M 2) Main Menu → “FET Mobile Internet” “Homepage” Your phone is already configured to access FET Mobile The FET Mobile Internet service page is displayed. Internet. → “FET Mobile Internet” “Bookmarks” FET Mobile Internet is a new mobile Internet portal See page 90.
Navigating a WAP or Web Page Editing Bookmarks (M 2-2) → • a b c d: “FET Mobile Internet” “Bookmarks” Moves the cursor in the screen. Select the desired URL, and press [Options]. You can edit the list of Bookmarks by the following •...
Page 92
Browser Settings (M 2-7) (When a folder is highlighted) “Add New Bookmark”: → “FET Mobile Internet” “Browser Settings” Creates new bookmarks. “Font Size”: Sets the font size for “Create Folder”: Creates new folders. browsing. “Rename Folder”: Renames the folder. “Scroll Settings”: Sets the scroll units and “Move”: Moves folder and...
Page 93
“Initialise Browser”: Initialises the browser “Reload Page”: Reloads the WAP/Web page settings and memory. to get updated information. “Reset Settings”: Resets all the browser “Go to URL”: Allows you to type in the settings to the default URL of a site directly. settings.
Gallery (M 6) • You can scroll through your pictures with P and Gallery contains all your pictures, music and videos. You can also transmit pictures, sounds and video clips • To change the default view of pictures (Icon View, via infrared or Bluetooth wireless technology to other Inline Display, Grid View or Display Preview), press OBEX-enabled devices.
Page 95
Video Gallery (M 6-2) Saving an Image to Phonebook Entries You can use this option only for pictures saved in the Video clips that are recorded by your phone’s video handset memory. camera or video clips that are downloaded from mobile →...
Page 96
Downloading Video Clip Files • For other option menus, see “Common Option → → “Gallery” “Video Gallery” “Download More” Menus” on page 97. The video clip file download site is displayed. Downloading Sound Files Sound Gallery (M 6-3) → → “Gallery”...
Page 97
® Flash (M 6-6) Setting a Theme → “Gallery” “Themes” ® Playing Back Flash Files Select the desired theme file. ® → “Gallery” “Flash ” The selected theme file is set as the default theme. Select the file you wish to play back. To stop playback, press U.
Page 98
Other Documents (M 6-7) Common Option Menus Some types of files are stored in the Other Documents For using the desired file type, first select the folder of the phone. You can edit and use these files as appropriate folder in the Gallery menu. Gallery Gallery data.
Page 99
Note Note ® • Some pictures with DRM may not be opened even • Pictures/Sounds/Video clips/Themes/Flash files/ when an attempt is made to activate it. Other Documents data protected by copyright cannot be sent attached to a message, with the exception of Sending Gallery Data Separate Delivery files.
Page 100
Using Gallery Data To See the Gallery Details You can copy, move, sort, rename, and delete the saved Select the appropriate folder for the desired file type Gallery data. (p. 97). Select the appropriate folder for the desired file type Highlight the file you wish to view the details of.
Page 101
Memory Status (M 6-8) This function helps you to check the memory status of the handset memory or memory card. Memory status covers the following: Handset Memory: Pictures, Videos, Sound Gallery, ® Themes, Java™ Gallery, Flash Other Documents, Others, Total and Free Memory Card: Pictures, Videos, Sound Gallery,...
Java™ (M 1) Executing Applications → “Java™” “Java™ Gallery” Java™ Gallery (M 1-1) Select the title of the application you wish to execute. The list of Java™ applications is displayed. The selected application is executed. When using Downloaded applications are displayed in order network connection type applications, connection starting from the latest one.
Page 103
Setting Permission “Use Multimedia”: Sets permission to use the You can set permission for selected Java™ multimedia recording. applications. Select one of the following options: → “Java™” “Java™ Gallery” “Always Ask”: The confirmation message is Highlight the desired Java™ application. displayed every time network access is executed.
Page 104
Java™ Settings (M 1-2) Viewing Application Information You can check the information of Java™ applications. Application Volume (M 1-2-1) → “Java™” “Java™ Gallery” You can set the volume of the application such as the Highlight the desired Java™ application. sound effect to one of the five levels or silent. When the Press [Options] and select “Details”.
Page 105
To Set the Blinking Operation Select the desired method. This setting enables the backlight to be controlled by • “Call Priority”, “Message Priority”, “Alarm the application. If set to “Off”, the backlight cannot be Priority” or “Request Priority”: turned on from the application. The application is suspended automatically, and →...
Page 106
Screensavers Default Settings (M 1-2-8) You can download screensaver applications for the → → “Java™” “Java™ Settings” “Set to Default” stand-by screen and set the time period for the Enter your handset code. screensaver to activate. The default handset code is “9999”. For details on →...
Organiser (M 3) Note • If the date and time settings have not been entered, the date and time entry screen is displayed (p. 134). Calendar (M 3-1) • The reminder will not sound when the profile is set to The calendar allows you to easily schedule “Silent”, but will sound when “General Volume”...
Page 108
Viewing a Schedule Entry a/ b : Moves the cursor upward (last week) or downward (next week). → → “Organiser” “Tools 1” tab “Calendar” Weekly view Select the day you wish to view. Displays the previous week. Select the desired entry. Displays the next week.
Page 109
Setting a Colour Note You can highlight a date or days of the week with seven • If the same date is set with both a date colour and colour options. a day of the week colour, the date is highlighted in the date colour.
Page 110
Finding a Schedule Entry Deleting Schedule Entries You can search for a schedule entry by subject or In any view, press [Options] and select “Delete”. category. Select the desired option. To Search by a Subject “This Appointment” (daily view): → →...
Page 111
Receiving a Schedule Entry “All This 6Months” (6-month view): Deletes all entries for the When the phone receives a schedule entry, a confirmation message is displayed in stand-by. selected six months. Select “Yes”. “All Appointments”: Deletes all entries in this The received entry is saved in the Calendar.
Page 112
Alarms (M 3-2) • “Alarm Volume”: Sets the desired volume. Setting the Alarms The alarm will not sound when “Alarm Volume” The alarm function allows you to be alerted at a is set to “Silent”. specified time. • “Vibration”: Note that you need to set the current date and time Sets the vibration pattern of the alarm.
Page 113
Setting for Silent Profile Note You can set whether to sound the alarm when the • If the date and time settings have not been entered, profile is set to “Silent”. the date and time entry screen is displayed (p. 134). →...
Page 114
To Change the Duration of Alarm Tone or Video To Set for the Silent Profile You can set whether to sound the alarm when the On the New Entry screen, select “Reminder”. profile is set to “Silent”. Select “Duration”. → →...
Page 115
To Unlock the Secret Settings Temporarily To Search by a Due Date You can show the secret tasks temporarily. → → “Organiser” “Tools 1” tab “Tasks” → → “Organiser” “Tools 1” tab “Tasks” Press [Options] and select “Find”. Highlight the desired entry. Select “By Due Date”.
Page 116
Calculator (M 3-4) Viewing the Memory Status → → “Organiser” “Tools 1” tab “Tasks” The calculator function performs the 4 arithmetic calculations using up to 12 digits. Press [Options] and select “Memory Status”. → → “Organiser” “Tools 1” tab “Calculator” Deleting Entries →...
Page 117
Expenses Memo (M 3-5) Rate Conversion You can also use the calculator as a currency calculator You can record an expenses memo with pre-defined or to convert from/to a home currency using a conversion edited categories. rate that you enter. Recording in the Expenses Memo (M 3-5-1) To Set a Currency Conversion Rate...
Page 118
Stopwatch To Change Amount (M 3-d-1) In the total view, highlight the desired item. You can store 4 lap times when using the stopwatch function. Press [Options] and select “Change Amount”. → → “Organiser” “Tools 2” tab “Stopwatch” Enter the desired amount using the digit keys. Press [Start].
Page 119
Countdown Timer World Clock (M 3-d-2) (M 3-d-3) → → “Organiser” “Tools 2” tab “Countdown Timer” Setting the Time Zone Enter the time to count. → → “Organiser” “Tools 2” tab “World Clock” You can set the time from 1 second to 60 minutes. Press [Edit] and select “Set Time Zone”.
Page 120
Hour Minder (M 3-d-4) “Link to World Clk”: Sets to sound a tone according to Hour Minder function informs you of the time by the time of the World Clock. sounding a tone. → → “Organiser” “Tools 2” tab “Hour Minder” Document Viewer (M 3-d-d-1) Select “Switch On/Off”.
Page 121
Editing Notepad Entries • Depending on how the PDF document was created, some characters in a PDF file may not be displayed. → → “Organiser” “Tools 3” tab “Notepad” • Document files that are saved in Gallery or linked in Highlight the entry you wish to edit.
Page 122
Sending Notepad Entries Note • Press a (or V) or b (or W) to adjust the sound → → “Organiser” “Tools 3” tab “Notepad” volume when playing back the recorded file. Highlight the entry you wish to send. Sending Voice Clips Press [Options] and select “Send”.
Page 123
Scanner (M 3-d-d-4) To Set the Focus Mode → → → With the built-in digital camera, you can read barcodes “Organiser” “Tools 3” tab “Scanner” “Scan Barcode” in QR code format. The scanned data can be saved as a Phonebook entry, URL, Email address and text. Press [Options] and select “Focus”.
Page 124
Scratch Pad Viewing the Scanned Data (M 3-d-d-6) → → → “Organiser” “Tools 3” tab “Scanner” Scratch Pad can be used as a screen memo for multiple “Scanned Results” purposes. Highlight the data you wish to view, then press Using the Scratch Pad [View].
SIM Application (M 10) You can refer to the information on the SIM/USIM card. Contact your service provider for further details. 124 SIM Application...
Settings (M 9) Enter your handset code. The default handset code is “9999”. For details on changing the handset code, see “Changing the Phone Settings Handset Code” on page 138. Setting a Profile (M 9-1) Event Light There are 4 profiles: “Normal”, “Car”, “Silent” and You can set the Small Light to flash when receiving an “Personal”.
Page 127
Status Light Setting the Display (M 9-2) You can set the Small Light to flash when you miss any You can change the display settings. incoming calls or new messages. Setting the Wallpaper (M 9-2-1) → → “Settings” “Phone Settings” tab “Profiles”...
Page 128
Assigning Pictures (M 9-2-2) Specify the area you wish to display using the Pictures can be displayed when turning the power on or navigation keys, then press B. off, when receiving an incoming call, or when Note operating the alarm. •...
Page 129
Setting the Font (M 9-2-4) Setting the Greeting Message (M 9-2-7) You can set the message which is displayed when the To Set the Font Size phone is turned on. → → “Settings” “Phone Settings” tab “Display → → “Settings” “Phone Settings”...
Page 130
To Set the Message Incoming Information Backlight (M 9-2-9) The backlight will turn off if you do not press the → → “Settings” “Phone Settings” tab “Display → → keypad for a certain length of time. You can specify a Settings”...
Page 131
To Adjust the Contrast of the Screen Setting the Dial Number (M 9-2-11) You can set the type of number which is displayed → → “Settings” “Phone Settings” tab “Display → → when making a call. Settings” “Backlight” “Dynamic Control” →...
Page 132
Sound Settings (M 9-4) Assigning a Ringtone or Ring Video Clip for an You can use this menu to check or edit the current Incoming Call profile settings (except “Any Key Answer”). You can set a ringtone or ring video clip for incoming voice calls and video callings.
Page 133
Notification Keypad Tones When receiving messages, Bluetooth notification or When the keypad tone is set on, you will hear a delivery reports, your phone will notify you of their confirmation tone each time you press any key. arrival with the ringtone or ring video clip you specify. →...
Page 134
Power On/Off Sound Charge Full Your phone can be set to emit a sound when it is Your phone can be set to emit a sound when it is fully switched on or off. charged. → → → → “Settings” “Phone Settings”...
Page 136
To Set the Time Zone (M 9-5-3) To Select the Date Format (M 9-5-6) → → → → “Settings” “Phone Settings” tab “Date & Time” “Settings” “Phone Settings” tab “Date & Time” → → “Set Time Zone” “Date Format” Press c or d to select the home city to set. Select from “D-M-Y”, “M-D-Y”...
Page 137
Motion Control Settings (M 9-7) “Browser”: Enables zooming in or zooming out by shaking the → → “Settings” “Phone Settings” tab “Motion phone forward or backward. Control” “Document Viewer”: Enables switching the page To Set Display Change by shaking the phone You can set whether the screen automatically changes sideways.
Page 138
Security Settings (M 9-11) To Change the PIN Code You can set various locks on your phone such as PIN This allows you to change the PIN code registered on Entry and Handset Lock. the SIM/USIM card. Before you change the PIN code, select “On”...
Page 139
Function Lock History Lock By setting this option on, all the functions of your The History Lock function prevents unauthorised phone will be locked until the correct handset code is access to Call Log. By setting this option on, Call Log entered.
Page 140
Call/Video Call Master Reset (M 9-12) You can return the settings for M1 to M11 to the default Voicemail & Diverts (M 9-d-1) settings. This service can be used to divert incoming calls that → → “Settings” “Phone Settings” tab “Master Reset”...
Page 141
To Activate the Diverts Service To Deactivate the Diverts Service Select the appropriate option. Select the appropriate option. → → → → “Settings” “Call/Video Call” tab “Voicemail & “Settings” “Call/Video Call” tab “Voicemail & → → Diverts” “Diverts” Diverts” “Deactivate” Select the desired item.
Page 142
Video Calling Settings (M 9-d-2) To Assign Hold Guidance Picture (M 9-d-2-4) Set various types of functions and services for video You can display an image saved in the phone on your callings. display while you are putting a call on hold. →...
Page 143
To Turn On or Off the Speaker (M 9-d-2-6) To Set the Auto Answer List Register phone numbers to the Auto Answer list. → → “Settings” “Call/Video Call” tab “Video Calling → → → Settings” “Loudspeaker” “Settings” “Call/Video Call” tab “Video Calling →...
Page 144
Restrict Calls (M 9-d-4) “Bar if Abroad”: Restricts all incoming calls This function lets you place restrictions on incoming when you are outside of the and outgoing calls. To activate this option you will need coverage from your the specified password, which is available from your registered service provider.
Page 145
Fixed Dialling Numbers Rejecting an Incoming Call This option is available on most SIM/USIM cards for You can register phone numbers you do not wish to mobile phones. It allows you to configure a SIM/USIM answer. card so that it can only be used to make calls to numbers To Reject the Registered Number on a predefined list.
Page 146
Changing the Network Password Auto Answer (M 9-d-6) You can set the phone to answer voice calls → → “Settings” “Call/Video Call” tab “Restrict → automatically. Calls” “Change N/W Password” → → Enter the old network password. “Settings” “Call/Video Call” tab “Auto Answer”...
Page 147
Network Settings Call Waiting (M 9-d-7) Note (M 9-d-d-1) Network Settings • This service may not be available on all mobile phone To Select a Service Automatically networks. Contact your service provider for more Each time the power is turned on, your phone selects a information.
Page 148
To Select a Network Automatically To Add a New Network Each time the power is turned on, your phone always → → “Settings” “Network Settings” tab “Network → → tries to connect to the preferred network. Settings” “Select Network” “Add New Network”...
Page 149
Internet Settings (M 9-d-d-3) Java™ Settings (M 9-d-d-3-2) → → “Settings” “Network Settings” tab “Internet Note → → Settings” “Java™ Settings” “Create New” • In normal operations, you do not need to change the “Profile Name”: Profile name for Java™ settings.
Page 150
Streaming Settings (M 9-d-d-3-3) Access Point Settings (M 9-d-d-3-5) → → → → “Settings” “Network Settings” tab “Internet “Settings” “Network Settings” tab “Internet → → → → Settings” “Streaming Settings” “Create New” Settings” “Access Point Settings” “Create New” “Profile Name”: Profile name for streaming “Access Point Name”: Access point name (unique (unique name)
Call Log (M 11) Call Timers (M 11-5) This function lets you check the duration of your calls. The phone will record the last 30 missed calls, received calls and dialled numbers. Checking the Duration of the Last Call and All Calls →...
Connectivity (M 12) To Search for Devices to be Paired (M 12-1-2) A maximum of 16 devices can be searched for. By configuring the settings in this menu, you can → → “Connectivity” “Bluetooth” “Search for connect to Bluetooth wireless technology or infrared Devices”...
Page 154
To Give Priority to the Handsfree Device and/or • You can save battery power by turning the Bluetooth the Audio Device wireless function off while it is not in use. Turn the → → “Connectivity” “Bluetooth” “Paired Devices” Bluetooth wireless function off in “To Turn On or Off Highlight the desired device.
Page 155
To Send All Data to Other Devices (M 12-1-4) Bluetooth Wireless Settings (M 12-1-5) You can send all the data for applications such as With this setting you can rename your phone, prevent Phonebook, Calendar, Tasks to selected devices. other devices from recognising your phone and turn the Bluetooth wireless function off automatically to save →...
Page 156
To Select the Sound Output To See Your Phone Details (M 12-1-6) → → → → “Connectivity” “Bluetooth” “Bluetooth “Connectivity” “Bluetooth” “My Phone Details” → Settings” “Sound Output” Infrared (M 12-2) Select “Phone/Earphone” or “Bluetooth Device”. In order to use the Infrared function, you need to search To Switch the Handsfree Settings for other infrared enabled devices to establish contact →...
Page 157
USB Charge (M 12-4) Sending All Data (M 12-2-2) → → “Connectivity” “Infrared” “Send All” You can set the phone to charge via USB, connected to a PC. Enter your handset code. → “Connectivity” “USB Charge” The default handset code is “9999”. For details on changing the handset code, see “Changing the Select “Enable”...
Page 158
Making a Backup File Restoring a Backup File With a memory card inserted in your phone, you can → → “Connectivity” “Card Settings” “Backup/ → back up data in Messages (Inbox, Drafts, Sent Restore” “Restore” Messages), Call Manager, Message Groups, Calendar, Enter your handset code.
• Sync Manager for WX-T930 If the WX-T930 CD-ROM screen is not displayed, Note double-click [Launcher.exe] in your CD-ROM. • Operation with software not provided by Sharp is not Select the USB driver from the on-screen guaranteed. instructions of your CD-ROM, and start installation...
Page 160
Select the modem driver from the on-screen Select the modem driver from the on-screen instructions of your CD-ROM, and install modem instructions of your CD-ROM, and install modem driver software following the on-screen instructions driver software following the on-screen instructions of your CD-ROM.
CD-ROM, and start installation installed within Handset Manager or our web-site, of Handset Manager software following the http://www.sharp-mobile.com. on-screen instructions of your CD-ROM. • If you have not installed the USB driver, follow steps 2 and 3 on page 158.
[Launcher.exe] in your CD-ROM. wireless technology interface or USB data cable. Select Handset Manager from the on-screen • If you have already installed Sharp Handset instructions of your CD-ROM, and start installation Manager, you need to uninstall the previous one.
Page 163
Main Control Panel Search Media File Play Browse Previous Input Window Next Media Management Add Playlist Add Smart Playlist in PC Remove Playlist Media Management in Handset Main Control Panel Media Management in PC Control all the main actions from here. Media files in PC can be easily explored in 2 main columns.
• With the drag and drop operation, you can upload the • Music Manager also allows you to import existing playlists (M3U file type) that you may have created sound files and the playlists from your PC, and also using other media programs. download them to your PC.
Troubleshooting Problem Solution • Adjust the backlight The display is Problem Solution difficult to read. brightness for the display. • Make sure the battery is • Check the radio signal The phone does not properly inserted and strength indicator as you may turn on.
Page 166
Problem Solution Problem Solution • If the message “Insert SIM • MMS settings and Card” is displayed when the configuration may be missing phone is switched on, you or incorrect or the network Cannot connect to cannot use your SIM/USIM does not support it.
Safety Precautions and • Do not switch on your phone near gas or flammable substances. Conditions of Use • Observe the rules concerning the use of mobile Your phone conforms to international regulations phones at gasoline stations, chemical plants and at all insofar as it is used under normal conditions and in sites where a risk of explosion exists.
Mobile Light LED Properties Mobile Light a) Emission Duration: Continuous Do not use Mobile Light near people’s faces. Eyesight may be temporarily affected leading to b) Wavelength accidents. White: 400-700 nm c) Maximum Emission Output CAUTION White: 240 µW (1.2 mW inside handset) Use of controls, adjustments or EN60825-1:1994 A1:2002 &...
Page 169
• Use only the aerial supplied or one approved by • The batteries’ performance is limited in low Sharp for your mobile phone. Using unauthorised or temperatures, particularly below 0°C and the phone modified aerials may damage the mobile phone.
Camera Operation • Do not place magnetic cards near your phone as it • Learn picture quality, file formats, etc. beforehand. may damage the recorded data. The taken pictures can be saved in JPEG format. Environment • Be careful not to move your hand while taking •...
In use however your Sharp mobile phone may operate at less than full power because it is designed to use only sufficient power to communicate with the network.
2 watts per kilogram frequency energy and, if not installed and used in averaged over 10 grams of body tissue. Your Sharp accordance with the instructions, may cause harmful mobile phone SAR value is 0.601 watts per kilogram.
Page 173
1. Reorient/relocate the receiving antenna. through periodic and thorough evaluation of scientific studies. The standards include a substantial safety 2. Increase the separation between the equipment and margin designed to assure the safety of all persons, receiver. regardless of age and health. 3.
Page 174
Body-worn Operation; This device was tested for * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/ typical body-worn operations with the back of the kg) averaged over one gram of tissue. The standard phone kept 1.5 cm from the body.
(iv) Defects caused by the fact that the Product was used with or connected to a product or an This limited warranty shall not apply in respect of the accessory not manufactured or supplied by Sharp following: or was used other than for its intended use.
Index Rejecting a Call 34, Recording Video Editing 46 37, 144 Clips 65, 76 Conditions of Use 166 Alarms 111 Sending a Busy Review 68 Connectivity 152 Area Info 84 Tone 34, 37 Scene 73 Countdown Timer 118 Speaker 34, 38, 142 Set Send Key 75 Battery 16, 167 Speed Dialling 33, 56...
Page 177
Music Player 60 Searching the List 50 Adding a File 62 Sending a Message 52 Java™ 101 Tasks 112 Adding a New Storage Memory 49 Java™ Settings 103 Themes 95 Playlist 63 Thumbnail 53 Troubleshooting 164 Downloading Phonebook Lock 138 Mass Storage 156 Music 63 Pictures 93...
Page 178
XT9 Text Input Using BoPoMoFo Input mode 44 Using Stroke mode 45 Using XT9 English Mode 42 Index 177...
Messages Quick Reference Basic Operation Press B during stand-by Power On/Off Long press F . and select “Messages”. WX-T930 Press a or b to scroll. Make a call Enter number, press D . Press B. Answer a call Press D . Create Message Function Key Shortcuts End a call...