Table of Contents
Advertisement
Section 3 - Configuration
This page allows you to save or restore your system configuration, reset, or reboot the DAP-1620. To access this page, click the
Management drop down menu at the top of the page, and select System.
Save Settings To
Save the system settings onto a file to the local hard drive. You will
Local Hard Drive
then see a file dialog where you can select a location and enter a
file name for the configuration file.
Load Settings From
Load the system settings from a previously saved file on the local
Local Hard Drive
hard drive. Click the Restore button that appears after loading the
system settings file to load the settings.
Restore to Factory
Restore the system settings to factory default settings. This will
Default Settings
erase all currently stored settings.
Reboot the Device
Click Reboot to reboot the DAP-1620.
D-Link DAP-1620 User Manual
System
43
Advertisement
Table of Contents
