Page 1
18002668282, 180030008282. Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than that of Samsung Electronics are owned by their respective owners.
Before Using the Product Installation Screen Setup Attaching the Stand (C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* Securing the Installation Space SAMSUNG MAGIC Bright / C24F399FH* / C27F390FH* / C27F391FH* / Precautions for storage Brightness C32F391FW*) Safety Precautions...
Page 3
Table of contents Setup and Reset Troubleshooting Guide FreeSync Requirements Before Contacting Samsung Customer Service Center Eco Saving Plus Testing the Product Checking the Resolution and Frequency Off Timer Check the following. PC/AV Mode Q & A Source Detection Key Repeat Time...
Be sure to allow the amount of space as shown below or greater when installing ― Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product the product. (Service fee will be charged.) ―...
Wipe the monitor with a clean, soft and dry cloth. • Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. ‒ Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove. ‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a ‒ The product lifespan may be reduced or a fire may result.
There is a high voltage inside the product. Never disassemble, repair or modify the product ‒ Be sure to power off the product and disconnect the power cord when water or other foreign yourself. substances have entered the product. Then contact Samsung Customer Service Center. ‒ Contact Samsung Customer Service Center for repairs. •...
Page 8
Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause • Do not touch the screen when the product has been turned on for an extended period of time as it afterimage burn-in or defective pixels. will become hot.
Chapter 02 Preparations Parts Icons Description Multi directional button that helps navigate. JOG Button ― The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter. Control Panel This LED is power status indicator and works as ―...
Direct Key guide ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. ― The function buttons page shows if Eye Saver Mode is enabled.
Function Key Guide ― To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again. UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes. PRESS(ENTER): The selected item will be applied.
Page 12
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button Power saving/Non-signal mode Source Change Down PRESS(ENTER) for 2 seconds Power Off When the monitor displays the Main menu the JOG Button could be used as below. JOG Button Action UP/DOWN...
Changing Brightness, Contrast and Sharpness settings Changing the Volume setting You can adjust Brightness, Contrast Sharpness by moving the JOG button up or down, if no OSD You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed. menu is displayed.
Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C24F396FH* / C27F396FH* / C27F397FH* C27F398FW* / C32F395FW* / C32F397FW* C32F391FW* C27F390FH* / C27F391FH*...
Adjusting the Product Tilt ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C24F396FH* / C27F396FH* / C27F397FH* / C27F390FH* / C27F391FH* / C32F391FW* C27F398FW* / C32F395FW* / C32F397FW* -2.0°...
Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* /...
Precautions for moving the monitor Do not directly apply pressure on the screen. Do not hold the screen when moving the monitor. Hold the lower part of the monitor when moving it.
If you install the product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
Installation Attaching the Stand (C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* / C32F391FW*) ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : The product is curved.
Attaching the Stand (C24F396FH* / C27F396FH* / C27F397FH* / C27F398FW* / C32F395FW* / C32F397FW*) ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. ―...
Removing the Stand (C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* / C32F391FW*) ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. : The product is curved.
Removing the Stand (C24F396FH* / C27F396FH* / C27F397FH* / C27F398FW* / C32F395FW* / C32F397FW*) ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. ―...
Chapter 03 Connecting and Using a Source Device Pre-connection Checkpoints Connecting and Using a PC ― Before connecting a source device, read the user manual provided with it. Select a connection method suitable for your PC. The number and locations of ports on source devices may differ from device to device. ―...
Connecting to Headphones C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* C24F396FH* / C27F396FH* / C27F397FH* C27F398FW* / C32F395FW* / C32F397FW* C32F391FW* ― The sound could only be heard when using the HDMI to HDMI or DP cable.
Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.
Chapter 04 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. SAMSUNG MAGIC Bright In PC mode • Custom: Customize the contrast and brightness as required.
Brightness Color You can adjust the general brightness of the picture. (Range: 0~100) Adjust the tint of the screen. ― This menu is not available when A higher value will make the picture appear brighter. Bright is set to Cinema Dynamic Contrast mode.
SAMSUNG MAGIC Upscale Eye Saver Mode Upscale function can enhance the layers of the picture details and the vividness of the picture. Set to an optimum picture quality suitable for eye relaxation. The function has more obvious effects on low-resolution pictures.
Picture Size Screen Adjustment ― This menu is available in Change the picture size. Analog mode only. ― This menu is only available when ― This option is not available when Picture Size is set to Screen Fit Mode. FreeSync is enabled.
Chapter 05 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. Transparency Position Set the transparency for the menu windows. Adjust the menu position. OnScreen Display Configure the transparency Language Transparency of the menu...
The response rate during the game may fluctuate depending on the resolution. A higher resolution generally decreases the response rate. • The sound quality of the monitor may be degraded. ― If you encounter any issues when using the function, contact the Samsung Service Center.
Page 34
The models in the Graphic Cards list supports FreeSync FreeSync can only be used with specific AMD graphics card models. Refer to the following list for supported graphics cards: Make sure to install the latest official graphics drivers from AMD that support FreeSync. ―...
Eco Saving Plus PC/AV Mode Reduce energy consumption compared to consumption at the maximum brightness level. PC/AV Mode to AV. The picture size will be enlarged. ― This option is not available when This option is useful when you view a movie. Bright is in Dynamic Contrast...
Power LED On Information Configure the settings to enable or disable the power LED located at the lower part of the product. View the current input source, frequency and resolution. • Working: The power LED is on when the product is turned on. Information •...
Windows 7 32Bit/64Bit Easy Setting Box enables users to use the monitor by partitioning multiple sections. • Windows 8 32Bit/64Bit To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at • Windows 8.1 32Bit/64Bit http://www.samsung.com.
Check the following. Customer Service Center Installation issue (PC mode) ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
Page 39
Not Optimum Mode is displayed. Video playback is choppy. This message appears when the signal from the graphics card exceeds the maximum resolution or Playback of high-definition large video files can be choppy. This may be because the video player is frequency for the product.
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to Control Panel Appearance and Themes Display Settings...
Chapter 09 Specifications General Model Name C22F390FH* / C22F392FH* C24F390FH* / C24F392FH* / C27F390FH* / C27F391FH* / C32F391FW* / C32F395FW* / C24F394FH* / C24F396FH* / C27F396FH* / C27F397FH* / C32F397FW* C24F399FH* C27F398FW* Size 54.6 cm 59.8 cm 68.5 cm 80.1 cm Display area 476.64 mm (H) x 268.11 mm (V) 521.40 mm (H) x 293.28 mm (V)
Page 42
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance. ― The above specifications are subject to change without notice to improve quality. ― This device is a Class B digital apparatus. ― For detailed device specifications, visit the Samsung Electronics website.
• Use of supplies or separately sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. •...