Siemens 3AH Installation Operation & Maintenance page 2

Hazardous voltages and high-speed moving parts.
Will cause death, serious personal injury or
equipment damage.
De-energize and ground the equipment before main-
tenance. Maintenance should be performed only by
qualified personnel.
Unauthorized parts should not be used in the repair of
the equipment.
Follow all safety instructions contained herein.
The information contained herein is general in nature and not intended for
specific application purposes. It does not relieve the user of responsibility to
use sound practices in application, installation, operation, and maintenance
of the equipment purchased. Siemens reserves the right to make changes in
the specifications shown herein or to make improvements at any time without
notice or obligations. Should a conflict arise between the general information
contained in this publication and the contents of drawings or supplementary
material or both, the latter shall take precedence.
For the purpose of this manual a qualified person is one who is familiar
with the installation, construction or operation of the equipment and the
hazards involved. In addition, this person has the following qualifications:
(a) is trained and authorized to de-energize, clear, ground, and tag circuits
and equipment in accordance with established safety practices.
(b) is trained in the proper care and use of protective equipment such as
rubber gloves, hard hat, safety glasses or face shields, flash clothing, etc.,
in accordance with established safety practices.
(c) is trained in rendering first aid.
These instructions do not purport to cover all details or variations in equip-
ment, nor to provide for every possible contingency to be met in connection
with installation, operation, or maintenance. Should further information be
desired or should particular problems arise which are not covered sufficiently
for the purchaser's purposes, the matter should be referred to the local sales
office.
The contents of this instruction manual shall not become part of or modify any
prior or existing agreement, commitment or relationship. The sales contract
contains the entire obligation of Siemens Energy, Inc. The warranty contained
in the contract between the parties is the sole warranty of Siemens Energy,
Inc. Any statements contained herein do not create new warranties or modify
the existing warranty.
IMPORTANT
QUALIFIED PERSON
SUMMARY