Sony SO-01G Instruction Manual page 37

Attaching/Removing the
attachment
Attachment 45A
Attaching
■
Check the shape of front/back of
1
the attachment and the attaching
part of the desktop holder, then fit
the attachment with the desktop
holder.
Firmly press the attachment
2
straight and make sure that there
are no gaps between the
attachment and the desktop
holder.
Removing
■
Put your fingertip into the groove
1
on the one side of the attachment,
lift it up at a slant while pressing
the desktop holder, then remove it
( ).
Groove
Attachment 45B
❖ Note
You cannot charge the battery by connecting the
･
desktop holder to a PC.
Check the connecting direction to connect correctly.
･
Wrong connection may cause damage.
Attachment 45A is attached to the desktop holder by
･
default.
Attachment 45B only supports terminal covers with
･
" (Compatible with genuine
純正卓上ホルダ対応
desktop holders)" mark (commercially available) and
the terminal can be charged on the desktop holder
with a compatible cover attached.
Charging with AC adapter
When using AC Adapter 05 (optional) for
charging, do the following procedures.
Opening/closing microUSB jack cover (P.25)
･
Notification LED
microUSB plug
AC adapter
Before Using the Terminal
35