Water Intake Fault - Miele G6835SCI Operating Instructions Manual

Water intake fault

Problem
One of the following
fault messages is dis-
played:

Open water supply

Intake
The following message
appears in the display
during the
Energy Saver
program:

Intake temp. low
Frequently Asked Questions
Possible cause and solution
The water supply is turned off.
 Turn on the water supply fully.
Before fixing the fault:
 Turn the dishwasher off with the  button.
There is a problem with the water intake.
 Turn on the water supply fully and start the pro-
gram again.
 Clean the water intake filter (see "Frequently asked
questions").
 The water pressure at the intake is lower than 4.35
psi.
Contact a plumber.
The intake water has not reached the required tem-
perature of 120°F (45°C) (see "Water connection, Wa-
ter intake").
 Start the program again.
 If the fault message appears again, select a differ-
ent program.
83