Introduction; Transfer Data Using Wireless Lan - Brother ScanNCut SDX900 Setup Manual

Hide thumbs Also See for ScanNCut SDX900:

Table of Contents

INTRODUCTION

Thank you for purchasing this cutting machine.

This guide provides setup instructions so that you can use a wireless network to send data created in

CanvasWorkspace to your cutting machine (hereafter referred to as "machine") as well as save data that you

have edited on your machine to CanvasWorkspace. Carefully read the instructions in this guide and complete

the setup to easily transfer data without the need for any device such as a USB flash drive.

Before using this machine, carefully read the "IMPORTANT SAFETY INSTRUCTIONS" in "Product Safety

Guide".

For basic operations of your machine, refer to "Operation Manual". The Operation Manual can be downloaded

from <http://s.brother/cmoae/>.

For information on the operations of CanvasWorkspace, refer to the "Help" menu in CanvasWorkspace.

In addition, after you have finished reading this guide, store it where it can quickly be accessed for future

reference.

With this function, patterns edited in the dedicated application CanvasWorkspace can be transferred to the

machine via a wireless network connection.

For details on transferring pattern data, refer to the Operation Manual.

a Wireless network access point/router

b Computer connected to wireless network access point/router

c Your machine

d CanvasWorkspace server

Perform the setup with the following steps.

Set up Wireless Network Connection

• In order to use CanvasWorkspace, a CanvasWorkspace (formerly ScanNCutCanvas) Login ID is necessary. If you do

not have a free account, go to <http://CanvasWorkspace.Brother.com> to create a new account.

Table of Contents