ENGLISH (Original instructions) SPECIFICATIONS Model DDF448 DDF458 Drilling into steel 13 mm 13 mm Drilling into wood 65 mm 76 mm Capacities Fastening wood screw 8 mm x 75 mm 10 mm x 90 mm Fastening machine screw 6 mm...
Unmodified plugs and matching outlets will EC Declaration of Conformity reduce risk of electric shock. Avoid body contact with earthed or grounded Makita declares that the following Machine(s): surfaces such as pipes, radiators, ranges and Designation of Machine: refrigerators. There is an increased risk of Cordless Driver Drill electric shock if your body is earthed or grounded.
16. If devices are provided for the connection of contact accidentally occurs, flush with water. dust extraction and collection facilities, ensure If liquid contacts eyes, additionally seek these are connected and properly used. Use of medical help. Liquid ejected from the battery may dust collection can reduce dust-related hazards.
Page 5
ENC007-7 Charge the battery cartridge once in every six months if you do not use it for a long period of IMPORTANT SAFETY time. INSTRUCTIONS FOR BATTERY CARTRIDGE Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
The tool will automatically stop during operation if the FUNCTIONAL DESCRIPTION tool and/or battery are placed under one of the following conditions: Overloaded: CAUTION: • The tool is operated in a manner that causes Always be sure that the tool is switched off and the •...
NOTE: Selecting the action mode Use a dry cloth to wipe the dirt off the lens of lamp. • 1. Action mode Be careful not to scratch the lens of lamp, or it may changing ring lower the illumination. 2. Arrow Reversing switch action 1.
Always use the side grip to ensure operating safety. Empty signal for remaining Insert the side grip so that the protrusions on the grip battery capacity base and steel band fit in between the grooves on the tool barrel. Then tighten the grip by turning clockwise. To change the angle of the side grip, loosen and remove 1.
There is a tremendous force exerted on the tool/bit • OPERATION at the time of hole break through. Hold the tool firmly and exert care when the bit begins to break through the workpiece. A stuck bit can be removed simply by setting the •...
The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.