Table of Contents
Advertisement
Section 3 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
Advanced Settings
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Reconnect Mode:
Select either Always on, On Demand, or Manual.
Maximum Idle
Enter a maximum idle time during which the Internet connection is
Time:
maintained during inactivity. To disable this feature, select Always
on as the reconnect mode.
Advanced Settings
Address Mode:
Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
Dynamic IP
Service Name:
Enter the ISP service name (optional).
Primary DNS
Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. The recommended setting is Auto.
D-Link COVR-C1203 User Manual
PPPoE
23
Advertisement
Table of Contents
