Table of Contents
Advertisement
Note
• The supported versions of Windows and macOS are listed on the following website.
https://uc.yamaha.com/
3.5.1. Connecting
Connect this product to the computer using the included USB cable. The product will start up automatically as
power is transmitted from the computer.
Note
• Since this product is recognized by computers as a standard USB audio device, there is no need to
install a separate USB driver.
3.5.2. Checking if Connected Correctly
Once the connection is finished, use the following procedure to check that the computer correctly recognizes
this product.
Note
• The fields, etc. on the setting screens differ depending on the computer you are using.
On Windows
1. Right-click the speaker icon at the bottom right of the screen and click "Sounds".
The "Sound" screen is displayed.
2. Click the "Playback" tab and check that "Yamaha YVC-200" is set as the default device.
If it is not set as the default device, click "Yamaha YVC-200" and click "Set Default".
3. Preparation
3.5. Connecting a Computer via USB | 11
Advertisement
Table of Contents
