Canon VB-730F Mk II Operation Manual page 106

[Auto]
The camera automatically determines ambient brightness and switches to Day Mode or Night Mode.
[Day Mode]
Captures normal color video.
[Night Mode]
Video turns to monochrome.
Removes the infrared filter to increase sensitivity.
Important
• If you use [Auto], conduct a thorough operation test beforehand to check the effectiveness of the setting.
• When [Auto] is selected, set [Exposure] to [Auto], [Auto (Flickerless)], [Auto (Flickerless2)] (
(Shutter-priority AE)], or [Auto (Aperture-priority AE)] (
• If you exit the Viewer while [Day Mode] or [Night Mode] is set, these will remain in effect, even if [Day/Night] is set to [Auto] on the
Setting Page.
To enable [Auto] Day/Night Mode, set [Day/Night] to [Auto] before exiting the Viewer.
• If you use [Auto], the infrared filter may move several times while the mode is switching between Day Mode and Night Mode. You will
not be able to use pan, tilt, zoom and manual focus during this period.
• If you use infrared illumination from an external device in Night Mode, turn on the infrared illumination before switching to Night Mode.
HM4x H730
• The camera is equipped with an infrared filter, but infrared illumination is not possible because the camera does not have a feature to
remove the filter.
106
S30 S31 S80x S90x
HM4x H730
HM4x H730
).
HM4x H730
S30 S31 S80x S90x
), [Auto