Related Manuals for LG LSW140B
Summary of Contents for LG LSW140B
- Page 1 OWNER’S MANUAL Wall Mounting Bracket Please read this manual carefully before operating your set and retain it for future reference. LSW140B www.lg.com (Brazil : www.lge.com) P/NO : MFL63640554 (1312-REV00)
-
Page 2: Important Safety Instructions
Component Wall mount anchor Wall mount screw Set screw User manual Set protection cushion 4 units 4 units M4 X 10 mm 4 units 4 units IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Warning This wall mount should be installed by a trained and Do not install the product where the weight cannot... -
Page 3: Before Installation
Caution When installing the product or adjusting the Install the product according to the directions in height of the product after installing, always do the user manual. so with 2 people. If the product is not installed based on the directions in the user manual, it can cause a serious injury or damage to the Working alone can cause the product to fall off and result in product. -
Page 4: Installation Method
Installation method - Tools you will need : Phillips head "+" driver(Manual or motorized) Ø4 mm drill bit for wood or steel / Level / Stud finder / Drill. You may also need an 8 mm socket wrench or an Ø8 mm drill bit for concrete. Separating the TV bracket Safety pin <Work procedure>... - Page 5 How to attach to masonry walls - Use the anchors for wall material of concrete, light concrete, strong natural stone, soft natural stone masonry brick and hallow block that do not crack. Please follow the below direction. - Check the material of the wall and the thickness of the finishing. - When installing the product on wall material not designated, install the product so that each fixated location can withstand the pull out load of 70 kgf (686 N) and shear load of 100 kgf (980 N) or above.
- Page 6 How to assemble the wall mount support and display - Always install the display with 2 or more people. Safety pin 1. Set the display with the guide spacer assembled on the wall mount bracket on the wall in arrow direction. At this time, align the bottom assembly part and lift the set up lightly to align the top part.
-
Page 7: Product Specification
Product specification [ Unit : mm ] -15°-+15° ±2° -15°-+15° ±2° Max. Min. Model Name LSW140B Width (mm) Height (mm) Depth (mm) Weight (kg) Weight with packing (kg) Wall Mount VESA Specification 75 X 75 / 100 X 100 / 200 X 100... - Page 8 The model and serial number of the Supported Displays: product is located on the back or one (Please contract the retailers or refer to the side of the product. Record it below TV owner’s manual for applicable models.) should you ever need service. MODEL SERIAL...