Sony DCR-TRV940 Operating Instructions Manual page 32

Recording a picture
Shooting with the Mirror Mode
This feature allows the camera subject to view him-or herself on the LCD screen.
The subject uses this feature to check his or her own image on the LCD screen while
you look at the subject in the viewfinder.
Set the POWER switch to CAMERA or MEMORY/NETWORK (DCR-TRV950 only).
Rotate the LCD screen 180 degrees.
The
Xz appears in the standby, and z appears in the recording while the POWER switch
is set to CAMERA. Some of other indicators appear mirror-reversed and others are not
displayed.
Picture in the mirror mode
The picture on the LCD screen is a mirror-image. However, the picture will be normal
when recorded.
During recording in the mirror mode
•ZERO SET MEMORY on the Remote Commander does not work.
•FN appears mirror-reversed in the viewfinder.
When you press FN
The
32
indicator appears in the viewfinder and on the LCD screen.
does not appear on the screen.