Super Energy Saving - LG E2042S Owner's Manual

SUPER ENERGY SAVING Settings
1
Press ( SUPER ENERGY SAVING ) button on
the bottom of the Monitor set to display the SUPER
ENERGY SAVING OSD.
2
Set the options by pressing the ◄ or ► or ▼ buttons.
3
Select EXIT to leave the OSD menu.
Each option is explained below.
Menu
ON Enables SUPER ENERGY SAVING you can save energy with this energy-efficient function.
OFF Disables SUPER ENERGY SAVING.
RESET Resets the values of total energy consumption reduction and CO2 emission reduction estimates.
NOTE
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
SAVING DATA(W/h)
SUPER SAVING
LED SAVING
Saving Data depends on the Panel. So,those values should be different from each panel and panel
vendor.
LG calculated these values by using "broadcast video signal".
LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel.
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
function.
(1*LQGG 
482mm 558 mm
507 mm
(19 inch) (22 inch)
(20 inch)
4 W/h 5 W/h 6 W/h
4 W/h 17 W/h
20 W/h
CUSTOMIZING SETTINGS

SUPER ENERGY SAVING

SUPER ENERGY SAVING IS
ACTIVE
YOU SAVED 12.34 TREES
POWER REDUCTION:123W
CO2 DECREMENT:123G
Description
583 mm 509 mm
(23 inch) (24 inch)
7 W/h
7 W/h
14 W/h
19 W/h
17
ON OFF
RESET
EXIT