Yamaha Revolabs FLX2 System Manual page 27

Device List
To see the list of Bluetooth devices the FLX has been
connected to, go to Menu Bluetooth and select
'Device List'.
Adding a Device
1. Go to the Menu Bluetooth. Select 'Discovery Mode'
to activate Bluetooth and accept Bluetooth Request
from other devices.
2. The FLX Dialer displays "This device is visible to
other devices in range for 3 minutes"
3. The discovery mode screen will read "System in
discoverable Mode, Start Scan From BT Device.
System Name: <System Name>"
4. Scan for devices from the Bluetooth device you want
to connect to the FLX2 System.
5. When the FLX2 System's name shows up on the
Bluetooth device, select the FLX2 System, and
connect to it.
6. If prompted for confirmation, select 'yes'. If prompted
for pin, type '0000' (default).
7. Press the 'Stop' key in order to abort the pairing
processes.
27