Temporary Disconnection Of The Dryer; Using The Program Selector To Choose A Drying Program; Program Selection; Selecting Optional Program Settings - Bosch WTG865H3UC Use And Care Manual / Installation Instructions

Table of Contents

Advertisement

Temporary disconnection of the dryer

Operate your dryer only when you are at home. If you
intend going on vacation or are not using your dryer for
an extended period of time, you should:
Turn off the circuit breaker.
1.
Pull out the power supply plug if possible.
2.
Clean the lint filter.
3.
Using the program selector to choose a
drying program
NOTICE: If the Child lock is activated, you must
deactivate it before you can select a program.
~ Child lock; Page 38
Use the program selector to select the desired drying
program. The dial turns in both directions and when a
cycle is selected its time duration appears in the display.

Program selection

For optimum drying results your dryer offers several
different types of programs to choose from.
Select the required drying program from the program
table according to the examples.
~ Program selection table; Page 36
Automatic programs
There are automatic programs for different types of
textiles (e.g. Cotton, Permanent Press).
The program sequence of automatic programs is
controlled by sensors. The duration of the program
depends on the measured degree of moisture in the
laundry and on the selected degree of dryness (e.g.
Extra Dry).
28
Special programs
The programs Anti Shrink, Hand Wash/Wool, Bulky/
Large Items, Quick 40™, SuperQuick 15™ and Jeans are
made for special type fabric loads.
Time programs
Time programs run at specific temperatures and are
suitable for delicate items, individual or a few small items
and subsequent drying.

Selecting optional program settings

By selecting optional program settings, you can adjust
the drying process to better suit the items you are drying.
The optional program settings can be selected and
deselected depending if the setting is allowed (not all
settings are allowed for all programs) and the cycle's
progress.
The indicator lamps of the buttons light up if the setting is
active.
For Time Dry
, Finish in, Wrinkle Block™ and Low
5
Heat the settings are not retained after the appliance is
switched off.
For Dryness Level the setting is retained for each
program separately after the appliance is switched off
(for fabric care this setting is not retained for the Cotton
program).
For Level Adjust the setting is retained for each program
separately after the appliance is switched off.

Advertisement

Table of Contents
loading

Table of Contents