Motorola WPCI810G User Manual page 16

CONFIGURATION
3 Click Add. The following Wireless Network Properties window is
displayed. If you are running the utility with WPA support, refer to
WPA Security Configuration for New Network section.
4 Enter information for the new wireless network.
Field
Network name (SSID)
Data encryption
(WEP enabled)
Network
Authentication
(Shared mode)
SECTION 3, CONFIGURATION
Description
Enter a Network Name (SSID) from 1 to
32 alphanumeric characters. This is the
SSID for a particular wireless access
point.
The security setting encrypts your
wireless transmission. Select if the type
of security encryption algorithm used on
this network is WEP64 or WEP128.
Select if your access point requires
Authentication. The option selected
here must match the Authentication
type used by the AP.
SECTION 3
3-5