Recording A Track To An Existing Group; Playing Groups; Playing A Track In Group Play; Selecting The Play Mode For Group Play (Group Play Mode) - Sony WALKMAN MZ-NF520 Operating Instructions Manual

Recording a track to an
existing group
You can add a track to an existing group.
1
Press GROUP, and then press . or
> until the group you want to add
a track to appears in the display.
2
While pressing GROUP, press and
slide REC.
3
Play the source sound.
Newly recorded track is added after
the current contents in the group.
z
• To add a track that is currently playing to a
group, stop or pause playing the track first,
and then do the procedure from step 2.
• You can set the recorder to always create a
new group without pressing the GROUP
button. See page 53 for details.

Playing groups

The recorder can operate various
playback with a disc which has group
setting.
This section explains the operations that
are done on the remote control. For details
on operations on the recorder, see
page 54.
Jog lever
44
P MODE/
+, –

Playing a track in group play

In group play, all groups are played in
order, starting with group 1, followed by
the unassigned tracks ("Group - -").
Playback stops after all the tracks have
been played.
1
During playback, press P MODE/
repeatedly until "
display.
To cue to the start of a group
(Group Skip)
1 During playback, press
Pressing – button cues to the first track
in the current group. Pressing the button
again cues to the first track of the previous
group.
For the recorder operation, see
page 54.
Selecting the play mode for
group play (Group Play Mode)
The shuffle play and program play
function can be used during group play
mode.
1
Press P MODE/
After normal playback (page 32), the
following play modes are displayed.
Display Play mode
All tracks in the groups
(Normal play back once (starting
Group Play) with the first track in
group 1).
, SHUF Shuffle play starts with
(In-Group the group that is
Shuffle) currently playing, and
continues with the
succeeding groups.
, PGM The groups are played in
(Group the order that you
Program) specified.
" appears in the
+ or –.
repeatedly.