Table of Contents
Advertisement
en Crease-removal function
The average programme duration
of the crease-removal function is
approx. 45 minutes and may be
longer or shorter depending on the
ambient temperature.
a After the programme has ended,
the display shows: "End".
The
3.
→ "Unloading the laundry",
Page 30.
The results of the crease-removal
function may vary depending on
the type of fabric, the amount of
laundry and the selected pro-
gramme.
Remove the laundry immediately
after the programme has ended to
prevent creasing.
Hang up the items of laundry and
4.
pull them into shape.
14.2 Filling the water tank
Your appliance removes the creases
from rarely worn clothing using cold
drinking water. If the display shows a
notification while the appliance is in
operation, fill the water tank.
ATTENTION!
Operating the appliance with water
that is dirty or too hot may result in
damage to the appliance.
Only fill the water tank with cold
▶
drinking water.
Never use condensed water, dis-
▶
tilled water, additives or descaler
for the crease-removal function.
Requirements
¡ You have started a programme
with the crease-removal function.
→ "Starting a programme with the
crease-removal function", Page 33
¡ The display shows:
¡ The condensation container
→ Page 32 is removed from the
appliance.
34
.
Add approx. 180 ml cold drinking
1.
water through the front opening,
using the water jug provided.
Check the water tank filter regu-
larly and clean the filter if it is dirty.
→ "Cleaning the water tank filter",
Page 42
If
does not go out on the dis-
play, add cold drinking water
through the front opening and
align the appliance correctly.
→ "Aligning the appliance",
Page 16
goes out on the display.
a
Insert the condensation container
2.
→ Page 33.
Start the programme.
3.
→ "Starting a programme with the
crease-removal function", Page 33
Advertisement
Table of Contents
