Setting A Multiboot Express Prompt - HP 2133 Mini-Note Multiboot User Manual

Setting a MultiBoot Express prompt

To set the computer to display the MultiBoot startup location menu each time the computer is started
or restarted, follow these steps:
1. Open Computer Setup by turning on or restarting the computer, and then pressing
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select System Configuration > Boot Options, and then press enter.
3. In the Express Boot Popup Delay (Sec) field, select the length of time in seconds that you want
the computer to display the startup location menu before it defaults to the current MultiBoot setting
(when 0 is selected, the Express Boot startup location menu is not displayed).
4. To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
8 Chapter 4 Choosing MultiBoot preferences
f10 while the