LG LRTLS2403 Series Owner's Manual page 9

3 . PLUG IN THE ICEMAKER
First remove connector cover, press like
arrow indicate in order to connect the
Icemaker into the freezer. (Figure 1)
Plug the Icemaker wire harness into the
connector (that is visible when the cover
is removed) located in the freezer wall
until you hear a click sound. (Figure 2)
NOTE: Secure the Icemaker to the
freezer using 1 screw
Plug the icemaker wire harness into the
connector located in the freezer wall until
you hear a click sound.
NOTE: Secure the icemaker to the freezer
using 1 screw 9 .
4. INSTALL THE ICE BUCKET
Before installing the ice bucket, install
the freezer shelf.
Put the ice bucket directly under the
icemaker (to the left and all the way to
the rear of the shelf under the icemaker).
Make sure that the icemaker switch is
set to O (off) position.
5. KEEP THIS MANUAL
ICEMAKER INSTALLATION
.
9
9
PUSH
PUSH
Figure 1
Figure 2
Icemaker
Ice bucket
9