Setting Up Your Notebook; Step 1: Insert The Battery Pack - HP Compaq Presario,Presario 1110 Startup Manual

Setting Up Your Notebook

WARNING: To reduce the risk of serious injury, read the Safety &
Comfort Guide. It describes proper workstation setup, posture, and
health and work habits for computer users, and provides important
electrical and mechanical safety information. This guide is located
on the Web site at http://www.compaq.com/ergo and on the hard
drive or on the Documentation Library CD that is included with
the product.
When you set up your notebook for the first time, you will
connect the AC adapter, charge the battery pack, turn on the
notebook, and run the Windows setup program.

Step 1: Insert the Battery Pack

WARNING: Do not mutilate or puncture battery packs. Do not
dispose of battery packs in fire, or they can burst or explode,
releasing hazardous chemicals. Rechargeable battery packs
must be recycled or disposed of properly.
To install the battery pack:
1. Turn the notebook upside down.
2. Insert the connector end of the battery pack into the battery
pack compartment, then slide the battery pack in until it
latches.
Startup Guide
Getting Started with Your Notebook
1–11