Ejecting A Diskette; Manually Ejecting A Diskette - HP Compaq Presario,Presario 1900 Supplementary Manual

3-10 Mobile Internet PC Features

Ejecting a Diskette

Because the SuperDisk drive has a motorized Diskette Eject button, your
computer must be turned on in order to eject a diskette. Do not turn off your
computer until the diskette has been ejected.
The diskette will not eject if the computer is still writing to the diskette.
To eject a diskette, complete the following steps:
1. Push the Diskette Eject button. The diskette will eject from the drive.
2. Remove the diskette from the drive.
OR
From the Windows desktop, double-click the My Computer
3. Right-click the 3½ Floppy (A:)
eject from the drive.

Manually Ejecting a Diskette

If you need to manually eject a diskette when the power is off, complete the
following steps:
1. Make sure the power is off and any external power sources are disconnected.
2. Insert a metal rod, such as a paper clip (approximately 1/16 inch in diameter
and at least 3/8 inch in length) into the Manual Eject hole and push firmly as
shown in the figure. The diskette should pop out of the SuperDisk drive.
Manually Ejecting a Diskette
3. Remove the diskette from the drive.
If the diskette does not eject, contact your local Compaq-authorized dealer,
reseller, or service provider.
H H H H
icon, then select Eject . The diskette will
G
icon.