Connecting To A Local Area Network (Lan) - HP Compaq Presario,Presario 2105 Reference Manual

Connecting to a Local Area
Network (LAN)
You can connect to local area networks (LANs). LANs give you
access to network resources, such as printers and file servers on
your corporate network, and possibly to the Internet.
To connect to a LAN:
1. Check that the existing LAN supports Ethernet 10Base-T
(10 Mbps) or 100Base-TX (100 Mbps) connections.
2. Plug the LAN cable (not supplied) into the built-in LAN port.
The cable must have an RJ-45 connector.
3. Windows automatically detects and sets up a LAN
connection. To edit settings, open Network and Dial-up
Connections in Control Panel.
See Windows Help for information about setting up and using
LAN connections. Select Start > Help and Support. Contact your
network administrator for network information.
Two lights at the LAN port indicate the connection status:
■
The yellow light indicates network activity.
■
The green light indicates a 100-Mbps link.
Reference Guide
Modem and Network Connections
4–5