Moving Around And Making Selections - HP Compaq Presario,Presario 80XL201 User Manual

Setup Configuration Utility 5-2
The SCU screen can be divided into four areas:
On the top line of the screen is the menu bar, which lists the titles
of the available menus. Each menu title contains a pull-down
menu, which displays items for settings.
The left column on the screen displays current settings of the
system. If you open a pull-down menu and select an item that
provides multiple options, the left column will display a submenu
where you can make further selections.
The right column on the screen provides details of the selected
item.
The bottom part of the screen provides keyboard/mouse
instructions for moving around and making selections.

Moving Around and Making Selections

You must go through two or three levels to complete the setting for
an item. In most cases, there are three levels: menu title, pull-down
menu, and submenu.
To move around and make selections, you can use both the
touchpad/mouse and keyboard.
Using the Touchpad/Mouse
You are advised to use the touchpad or mouse. It is more
straightforward than using the keyboard.
For most items, simply move the pointer with the touchpad/mouse
and left-click on the intended item. To cancel your selection, click
the right button. For some items, you will need to select with the
arrow keys.
Using the Keyboard
Keyboard information can be found at the bottom of the screen. You
can also use the shortcut key, which is highlighted in a different color
on the screen.
Described below is the general procedure to complete a setting by
use of the keyboard:
1. Select a menu title with the left/right arrow key and press [Enter] to
pull down the menu. You can directly pull down a menu by
pressing the shortcut key.
2. From the pull-down menu, select an item with the up/down arrow
key and press [Enter] to access the submenu. You can directly
access the
submenu by pressing the shortcut key. The submenu displays the
options you can select. If no submenu appears, simply press
[Enter] to enable or disable the specific function.
3. For most menu items, pressing the [Tab] key will jump from one
item to another, thus allowing you to go through the items quickly.
My Presario – Getting Started