Table of Contents
Advertisement
en Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Controls
The controls are used to configure all functions of your
appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching noise reduction on or off
Decreasing the fan setting/
Fan run-on/
AirFresh function
6 Basic operation
6.1 Switching on the appliance
Pull out the filter pull-out.
1.
Press
.
2.
a The appliance starts at fan setting 2.
6.2 Switching off the appliance
Press
.
1.
Slide in the filter pull-out.
2.
6.3 Selecting a fan setting
Press
or .
▶
Note: When the filter pull-out is pushed in, only fan set-
tings 1, 2 and 3 can be selected.
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
In order to switch on the intensive setting 2, press .
1.
appears in the display.
a
Press
to switch on the intensive setting 1.
2.
appears in the display.
a
a After approx. six minutes, the appliance automatic-
ally switches to a lower fan setting.
6.5 Switching off intensive mode
Press .
▶
a Intensive mode is ended early.
6
Increase the fan setting
Switching on intensive mode
Switching the lighting on or off/
Setting the brightness
6.6 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
Press and hold
until
▶
slide in the filter pull-out.
a The appliance switches off automatically after ap-
prox. 10 minutes.
6.7 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Press
.
▶
6.8 Setting the brightness
Press and hold
until the required brightness is
▶
reached.
6.9 Switching on the AirFresh function
The fan runs for approx. five minutes per hour.
Press and hold
until
▶
6.10 Switching off the AirFresh function
Press
.
▶
6.11 Switching on the NoiseReduction
function
The noise reduction function reduces the fan noise.
The function is possible in all fan settings, except in fan
setting .
Press
.
▶
a The NoiseReduction function remains active even
after the appliance is switched off.
appears in the display, or
appears in the display.
Advertisement
Table of Contents
