Speaker Assembly - HP Compaq Presario,Presario B1201 Maintenance And Service Manual

Display assembly (see
e.
Top cover (see
f.
Remove the Bluetooth module:
Disconnect the Bluetooth module cable (1) from the system board.
1.
Remove the two Phillips PM2.0×4.0 screws (2) that secure the Bluetooth module to the system board.
2.
Remove the module (3).
3.
Reverse this procedure to install the Bluetooth module.

Speaker assembly

Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
66 Chapter 4 Removal and replacement procedures
Display assembly on page
Top cover on page 59)
54)
Spare part number
457906-001