Copying A Cd Or Dvd - HP Compaq Presario,Presario CQ40-600 User Manual

CAUTION:
Before writing to a disc, connect the computer to a reliable external power source. Do not write to a disc
while the computer is running on battery power.
Before writing to a disc, close all open programs except the disc software you are using.
Do not copy directly from a source disc to a destination disc or from a network drive to a destination
disc. Save the information to your hard drive, and then burn from your hard drive to the destination disc.
Do not use the computer keyboard or move the computer while the computer is writing to a disc. The
write process is sensitive to vibration.
NOTE: For details about using software included with the computer, refer to the software
manufacturer's instructions, which may be provided on disc, in the software Help, or on the
manufacturer's Web site.

Copying a CD or DVD

1. Select Start > All Programs > CyberLink DVD Suite > Power2Go.
2. Insert the disc you want to copy into the optical drive.
3. Click Copy at the bottom right of the screen.
Power2Go reads the source disc and copies the data to a temporary folder on your hard drive.
4. When prompted, remove the source disc from the optical drive and insert a blank disc into the drive.
After the information is copied, the disc you created ejects automatically.
44 Chapter 4 Multimedia
To prevent loss of information or damage to a disc, observe the following guidelines: