HP Compaq Presario,Presario F500 Maintenance And Service Manual page 41

Lift the left side of the cover (2) and swing it to the right.
3.
Remove the memory module compartment cover.
4.
NOTE:
The memory module compartment cover is included in the Plastics Kit, spare part number
442891-001.
Spread the retaining tabs (1) on each side of the memory module socket to release the memory
5.
module. (The edge of the module opposite the socket rises away from the computer.)
Remove the memory module (2) by pulling it away from the socket at an angle.
6.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the
memory module socket.
Remove the memory module.
7.
Reverse this procedure to install a memory module.
Component replacement procedures 33