Sharp AQUOS LC-40LE924RU Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LCD TV
  5. AQUOS LC-40LE924RU
  6. Operation manual

Sharp AQUOS LC-40LE924RU Operation Manual

Lcd colour television
Hide thumbs Also See for AQUOS LC-40LE924RU:
Table of Contents

Advertisement

Quick Links

Download this manual
LC-40LE924E LC-40LE924RU
LC-40LE824E LC-40LE824RU
LC-40LU824E LC-40LU824RU
LC-46LE824E LC-46LE824RU
LC-46LU824E LC-46LU824RU
LC-40LE814E LC-40LE814RU
LC-46LE814E LC-46LE814RU
LC-40LX814E LC-46LX814E
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
TELEVISOR DE CRISTAL LÍQUIDO
LCD RENKLİ TELEVİZYON
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D'EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
KULLANMA KILAVUZU
®

Advertisement

Table of Contents
loading

Related Manuals for Sharp AQUOS LC-40LE924RU

Summary of Contents for Sharp AQUOS LC-40LE924RU

  • Page 1 LC-40LE924E LC-40LE924RU LC-40LE824E LC-40LE824RU LC-40LU824E LC-40LU824RU LC-46LE824E LC-46LE824RU LC-46LU824E LC-46LU824RU LC-40LE814E LC-40LE814RU LC-46LE814E LC-46LE814RU LC-40LX814E LC-46LX814E LCD COLOUR TELEVISION OPERATION MANUAL LCD-FARBFERNSEHGERÄT BEDIENUNGSANLEITUNG TÉLÉVISEUR COULEUR À ÉCRAN MODE D’EMPLOI CRISTAUX LIQUIDES (LCD) MANUALE DI ISTRUZIONI TELEVISORE A COLORI LCD GEBRUIKSAANWIJZING LCD-KLEURENTELEVISIE MANUAL DE MANEJO TELEVISIÓN EN COLOR LCD...
  • Page 2 SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked and of the same rating as above, which is also indicated on the pin face of the plug, must be used.

  • Page 3: Table Of Contents

    Operating an AQUOS LINK device ...... 29 • LC_ LCFONT+ and LC logo mark Basic adjustment ............30 are registered trademarks of SHARP Corporation. This product is embedded with LC Font technology, which was Picture settings ........... 30 developed by SHARP Corporation for clearly displaying Audio settings .............

  • Page 4: Introduction

    Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. Important safety precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the cabinet of the TV. • Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement. • Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock. • Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer. • When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart. • Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed. • The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
  • Page 5 Introduction Caring for the front panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. • Wiping with a hard cloth or using strong force may scratch the surface of the front panel. • Use a soft damp cloth to gently wipe the front panel when it is really dirty. (It may scratch the surface of the front panel when wiped strongly.) • If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it. WARNING To prevent the spread of fire, keep candles or other open flames away from this product at all times. CE Statement: Hereby, SHARP Electronics (Europe) GmbH declares that the wireless LAN USB adapter (WN8522B) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: http://www.sharp.de/doc/WN8522B.pdf. NOTE The wireless LAN USB adapter is designed for indoor use only.

  • Page 6: Part Name

    Introduction Part name Remote control unit >a (Standby/On) LE924E/LE824E/LU824 R > (Page 18) ATV/DTV/SAT: Exit the “Menu” screen. NET: Return to the start page. Press to access conventional analogue TV mode. T NET Press to access Net TV. Press to access digital TV mode. Y p (Display information) Press to display the station information (channel number, signal, Press to access satellite mode. etc.) in the upper right corner of the RADIO screen (Page 43). DTV/SAT: Switch between radio P. INFO and data mode. Press to display programme • When only data broadcasting information transmitted through (no radio broadcasting) is digital video broadcasting (DTV/ transmitted by DVB, the radio SAT only).
  • Page 7 Introduction TV (front view) Yl/k (Volume buttons) !s/r (Programme [channel] buttons) #b (Input source button) @- (Menu button) <a (Power button) OPC sensor Remote control sensor Illumination LED TV (rear view) Antenna terminal Satellite antenna terminal EXT 1 (RGB) terminal RS-232C terminal DIGITAL AUDIO OUTPUT terminal...

  • Page 8: What Is The Menu

    Press a/b to select the item you want to select/adjust, and then press ;. Backlight Menu CH list Setup :Enter :Back Picture AV mode [Off] Backlight NOTE Contrast • Refer to the guide display below the menu bar to see when to press the ; button. This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read LCFONT characters on LCD screens. NOTE • “Menu” options differ in the selected input modes, but the operating procedures are the same. • Items with 4 cannot be selected for various reasons. • Some items cannot be selected depending on signal types, optional settings or connected devices.
  • Page 9 Introduction Operation without a remote control unit This function is useful when there is no remote control unit within your reach. Press @- and the “Menu” screen displays. Press !s/r instead of a/b or Yl/k instead of c/d to select the item. Press #b to complete the setting. About the guide display The guide display below the menu bar shows operations for the OSD. • The bar above is an operational guide for the remote control unit. The bar will change in accordance with each menu setting screen.

  • Page 10: Supplied Accessories

    Introduction Supplied accessories Remote control unit ( x 1) “AAA” size alkaline battery ( x 2) Cable clamp ( x 1) Pages 4 and 10 Page 10 Page 12 RGB component cable ( x 1) SCART cable ( x 1) AV cable ( x 1) Page 25 Page 25 Pages 25 and 26 Stand unit ( x 1) Wireless LAN USB adapter Operation manual (this publication) (WN8522B) ( x 1) Page 9 Page 55...

  • Page 11: Preparation

    Insert the stand into the openings on the bottom of the TV (hold the stand so it will not drop from the edge of the base area). Soft cushion NOTE • To detach the stand unit, perform the steps in reverse order. • A screwdriver is not supplied with this product. • The stand base is made of glass. Therefore, be careful not to drop the stand base or apply pressure to it. • Do not place heavy objects on the stand base. CAUTION The stand is made of tempered glass. Read the following precautionary instructions carefully and use it properly. • Do not drop or place unnecessary stress on the stand when assembling and attaching or removing it. • Be sure to not accidentally hit the glass part of the stand with a sharp or hard object, as it may cause the glass to break. • Using tempered glass with scratches for extended periods may lead to damage occurring. If there are scratches on the tempered glass, do not attempt to use the stand.

  • Page 12: Using The Remote Control Unit

    Preparation Using the remote control unit Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size alkaline batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. Open the battery cover. Insert two supplied “AAA” size alkaline batteries. • Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. Close the battery cover. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. • Do not mix batteries of different types. Different types of batteries have different characteristics. • Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries. • Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth. • The batteries supplied with this product may have a shorter life expectancy due to storage conditions. • If you will not be using the remote control unit for an extended period of time, remove the batteries from it.

  • Page 13: Quick Guide

    Quick guide Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Run the Preparation initial Watch TV settings Connect an antenna cable to the Check that the MAIN POWER Congratulations! antenna terminal (Page 12). switch on the rear of the TV is Now you can watch TV. turned on (;).

  • Page 14: Before Turning On The Power

    Quick guide Before turning on the power      Place the TV close to the AC outlet, Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable and keep the power plug within Satellite antenna cable reach. AC cord (product shape varies in some countries) Check that the MAIN POWER switch on the rear of the TV is turned on (;).

  • Page 15: Initial Auto Installation

    Quick guide Starting channel search. Initial auto installation When the TV is powered on for the first time after Digital search purchase, the initial auto installation wizard appears. Analogue search Follow the menus and make the necessary settings one after another. Skip Confirm the following before turning on the power Press a/b to select “Digital search”, “Analogue search” or “Skip”, and then press ;. E Is the antenna cable connected? • To watch both analogue broadcasts, digital broadcasts E Is the AC cord plugged in? and satellite broadcasts, you should perform the auto E Is the MAIN POWER switch turned on (;)? installation setting for each format (Page 34). • If you want to search for more broadcasts, execute “Additional search” from the “Programme setup” menu Press <a on the TV.
  • Page 16 Quick guide Searching for cable broadcasts Menu Description Selectable items Specifies if you To change each item to the appropriate Scrambled need to add pay-TV Yes, No settings: stations services. Press a/b to select the menu, and then Channel: Extracts all press ;. of information from a channel (quick, but Scrambled stations [Yes] needs corresponding TV stations). Search method [Channel] Frequency: Checks Start frequency every frequency in range (slow).
  • Page 17 Quick guide Start search: Searching for satellite broadcasts DVB-S/S2 channel searching. Press c/d to select “Yes”, and then press Press c/d to select “Start search”, and then press ;. The TV searches for and stores all the receivable TV stations according to their settings and the connected antenna. • Select “Yes” to sort the search result in alphabetical • If you do not perform “Satellite search” setting, select order.
  • Page 18 Quick guide 2 When you change the antenna Press a/b to select “Next”, and then press connection setting: Press c/d to select “Change setting” on the DVB-S/S2 setting screen in the left column, SAT1 [ASTRA 1] and then press ;. Next • The antenna connection setting screen is displayed.
  • Page 19 Quick guide Channel strength of DVB-T Checking signal strength and channel strength (DVB-T/C/S/S2) Supply voltage Frequency Signal strength If you install a DVB-T/C/S/S2 antenna for the first time Channel strength CH No. or relocate it, you should adjust the alignment of the Signal strength antenna to receive a good reception while checking the antenna setup screen. Current Max. Quality Go to “Menu” > “Setup” > “View setting” > “Channel settings” > “Antenna setup- Current Max.

  • Page 20: Watching Tv

    Watching TV Daily operation Switching between digital, satellite and analogue broadcasts Switching on/off Watching digital Watching analogue broadcasts broadcasts Turning on/off the power Turn on (;) the MAIN POWER switch on the rear of the TV (Page 5). Watching satellite To turn on the TV, press <a on the TV broadcasts or >a on the remote control unit.
  • Page 21 Watching TV Selecting an external video Selecting a sound mode source DTV/SAT mode Once the connection is If multi sound modes are received, each time you press CH list made, press b to display 7 the mode switches as follows. the “INPUT” screen, and then press b or a/b Audio (ENG) STEREO to switch over to the INPUT appropriate external source with ;. NOTE Audio (ENG) CH A • You can also select an external video source from CH A CH B CH AB Switchable “CH list” > “INPUT”.

  • Page 22: Epg

    Watching TV EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/SAT/RADIO/ DATA, view detailed information about them, tune to an event currently on-air. Useful settings for using EPG Basic setting EPG display settings View setting Option Display range setup If you want to use the EPG for digital stations, select The “Display range setup” allows you to select three “Yes”. The EPG data must be automatically captured types of time spans for display on the screen. while the TV is in standby mode. After setting to “Yes”, Go to “Menu” > “Setup” > “Option” > “EPG it may take some time to turn off the power using the setup” > “Display range setup”. remote control unit due to the process of the data capture.
  • Page 23 Watching TV Selecting a programme using EPG Basic operation The illustrations on this page are explained using three digit services. Display/Close the EPG screen Press EPG. Programme info. Search by genre Search by date Timer list Select Enter Back Exit NOTE • You can also display the EPG screen from “Menu” > “EPG” > “EPG”. Select a programme 2 Select the desired programme 1 Select the time span Press a/b to select the desired programme.
  • Page 24 Watching TV 6 Display the timer list for TV Cancelling the timer setup programmes Press EPG. Press B. • Refer to page 22 for the timer setup. Press a/b/c/d to select the programme with timer setup, and then press ;. Timer setup using EPG Press c/d to select “Cancel”, and then press You can switch to a programme at a set time.

  • Page 25: Teletext

    Watching TV Buttons for teletext operations Teletext Buttons Description What is teletext? Increase or decrease the page number. :r/s Teletext broadcasts pages of information and Select a group or block of pages displayed entertainment to specially equipped TV. Your TV receives in the coloured brackets at the bottom of Colour (R/G/Y/B) teletext signals broadcast by a TV network, and decodes the screen by pressing the corresponding colour (R/G/Y/B) on the remote control unit. them into graphical format for viewing. News, weather and sports information, stock exchange prices and Numeric buttons Directly select any page from 100 to 899 by programme previews are among the many services using the 0_9 numeric buttons. available. k (Reveal Reveal or hide hidden information such as Turning teletext on/off hidden teletext) an answer to a quiz. Stop updating teletext pages automatically Select a TV channel or external source 3 (Freeze/Hold)

  • Page 26: Connecting External Devices

    Connecting external devices Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device. • Refer to page 50 for connecting a PC to the TV. NOTE • The cables illustrated except as described in “(supplied accessory)” in pages 24_26 are commercially available items. Video connections DVI/HDMI conversion HDMI connection Using a DVI/HDMI cable, the digital video signals of a DVD can also be played via the compatible HDMI connection. The sound must be fed in additionally. Example of connectable devices • When connecting a DVI/HDMI cable to the HDMI terminal, the E DVD player/recorder image may not come in clearly. E Blu-ray player/recorder • Both HDMI and DVI use the same HDCP copy protection E Game console method.
  • Page 27 Connecting external devices SCART connection Component connection Example of connectable devices Example of connectable devices E VCR E DVD player/recorder E VCR E DVD player/recorder You will enjoy accurate colour reproduction and high quality images through the EXT 3 terminal when connecting a DVD player/recorder or other device.     Decoder SCART cable (supplied accessory)/Conversion cable SCART cable (G) (B) (R) NOTE • In cases when the decoder needs to receive a signal from the TV, make sure to select the EXT 1 terminal to which the...

  • Page 28: Audio Connections

    Connecting external devices Audio connections VIDEO connection Speaker/amplifier connection Example of connectable devices E VCR Connect an amplifier with external speakers as shown E DVD player/recorder below. E Game console Connecting an amplifier with digital/ E Camcorder analogue audio inputs You can use the EXT 2 terminal when connecting to a game console, camcorder, a DVD player/recorder or other device.    DIGITAL AUDIO IN AV cable (supplied accessory)/Conversion cable AUX1 IN Optical audio cable (for digital audio)

  • Page 29: Aquos Link

    AQUOS LINK Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/ recorder) using a single remote control unit. NOTE • AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS recorder are scheduled to be on sale after the release of this TV. • AQUOS LINK does not work while using time shift functions. What you can do with AQUOS LINK ✔ One touch recording (DTV/SAT only) You do not have to search for the remote control unit of your recording device. Press the REC E or REC STOP H buttons to start/stop recording what you see on the recorder. ✔ One touch play When the TV is in standby mode, it will automatically turn on and play back the image from the HDMI source.

  • Page 30: Aquos Link Setup

    AQUOS LINK Connecting an AQUOS BD player/AQUOS recorder via Connecting an AQUOS BD the AQUOS AUDIO speaker system player/AQUOS recorder only     AQUOS BD player/AQUOS recorder AQUOS BD player/AQUOS AQUOS AUDIO speaker system recorder * The ARC (Audio Return Channel) function works only when using the HDMI 1 HDMI-certified cable Optical audio cable terminal.

  • Page 31: Operating An Aquos Link Device

    AQUOS LINK NOTE Operating an AQUOS LINK device • If a connected device does not have this function or the device is in a status where the menu cannot be displayed (recording, AQUOS LINK allows you to operate the HDMI-connected entering standby, etc.), this function may not be available. device with a single remote control unit. Media change If your recorder has multiple storage media, select the media type here. Press a/b to select “Media change”, and Press I to start playback of a title. then press ;. • See the section Top menu/title list if you want to start Select the desired medium, such as DVD playback using the list of the titles in the AQUOS BD recorder or HDD.

  • Page 32: Basic Adjustment

    Basic adjustment NOTE Picture settings • You can also select “AV mode” by pressing #. • The item marked with * is available only when selecting “HDMI 1”, “HDMI 2”, “HDMI 3”, “HDMI 4” or “EXT 3” from the “INPUT” Go to “Menu” > “Setup” > “Picture”. menu. • The item marked with ** is available only when accepting an Menu “x.v.Colour” signal through an HDMI terminal. • If you select “AUTO”, some selections in the “AV mode” menu CH list Setup may not be automatically set. :Enter :Back Picture Picture AV mode Automatically adjusts the brightness of the screen. Item [Off] The brightness is fixed at the value set Backlight in “Backlight”. Automatically adjusts.
  • Page 33 Basic adjustment Picture Quad pixel plus Advanced Reproduces high-definition images with higher resolution. This function is available only for the 924 model series. This TV provides various advanced functions for optimising the picture quality. Gamma adjustment Go to “Menu” > “Setup” > “Picture” > Selects the tone difference of the brightness and “Advanced”. darkness of the image according to the type of programme watched from a maximum of e 2 to a C.M.S.-hue minimum of f 2. This function adjusts the hue of a selected colour using a Film mode six-colour adjustment system. Automatically detects a film-based source (originally C.M.S.-saturation encoded at 24 or 25 frames per second, depending on the vertical frequency), analyses it and then recreates This function increases or decreases the saturation of a each still film frame for high-definition picture quality selected colour using a six-colour adjustment system. (“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”). C.M.S.-value Active contrast This function adjusts the brightness of a selected colour Automatically adjusts the contrast of an image according...

  • Page 34: Audio Settings

    Basic adjustment Audio settings Audio Audio description setting Go to “Menu” > “Setup” > “Audio”. This function allows you to enable output of audio Menu description if the TV receives a signal including audio CH list Setup description. :Enter :Back NOTE • When the “Audio description” is set to “On”, the audio description sound is superimposed on the main audio when Audio you select a broadcast compatible with audio description. STANDARD • If you do not clearly hear the sound for the visually impaired, go to Auto volume “Menu” > “Setup” > “Audio” > “Audio description setting” > “Mix [Off] level”, and select the upper level to turn up the volume. • This function is available only for DTV broadcasts. This “Audio description setting” menu is not displayed for the ATV or the Audio external inputs.

  • Page 35: Power Save Settings

    Basic adjustment “Energy save” status icons Power save settings Icon Description Go to “Menu” > “Setup” > “ECO”. “Energy save” is set to “Standard”. Menu “Energy save” is set to “Advanced”. CH list Setup When “Energy save” is set to “Standard” or “Advanced”, :Enter :Back “Energy save” status icons appear in the “Picture” menu and channel information windows. ECO picture control No signal off [On] Energy save [Off] When set to “Enable”, the TV will automatically enter No signal off standby mode if there is no signal input for 15 minutes.

  • Page 36: Channel Settings

    Basic adjustment Digital search Channel settings After selecting the service you want to search, either “Terrestrial” or “Cable”, refer to Digital Menu broadcast setting on pages 13_14. CH list Setup Analogue search :Enter :Back The TV searches for, sorts and stores all the receivable TV stations.
  • Page 37 Basic adjustment Manual adjust Manual search Configure various settings for each service using the Add new services within a specified frequency band. colour (R/G/Y/B) buttons. After setting the items on the following screen, the TV starts searching. • Refer to the table about menu items in the right column Service Service Lock CH skip Old LCN on page 14. name Frequency Symbol rate QAM modulation Search start Lock CH skip Delete Sort Press a/b to select the desired service. Manual adjust Press the colour button on the remote control This function is the same as in “Terrestrial”. Refer to...
  • Page 38 Basic adjustment Analogue setting Skip You can reconfigure the analogue TV channels settings Channels with “Skip” set to “On” are passed over when automatically or manually. using :r/s even if selected while watching the image from the TV. Additional search Use this menu to add new services automatically after Decoder “Analogue search” in the “Auto installation” menu has been completed. When connecting a decoder to the TV, you need to select • Start searching channels after selecting the colour system and “EXT 1”. sound system. NOTE Manual adjust • The factory preset value is “Off”. Use this menu to set up analogue TV channels manually. After selecting “Yes” on the screen, press Lock a/b/c/d to select the channel you want to set and then press ;.

  • Page 39: Password/Lock Settings

    Basic adjustment View setting Password/Lock settings Parental rating View setting This function allows DTV services to be restricted. It prevents children from watching violent or sexual scenes that may be harmful. Allows you to use a PIN to protect certain settings from Go to “Menu” > “Setup” > “View setting” > being accidentally changed. “Individual setting” > “Parental rating”. Go to “Menu” > “Setup” > “View setting” > Repeat steps 1 to 4 in when selecting “Yes” “Individual setting”...

  • Page 40: Language Settings

    Basic adjustment View setting Language settings Language View setting You can select an OSD language from among 23 Digital audio language languages. Refer to the OSD language column in the specification table for the selectable languages (Page 65). Set up to three preferred multi audio languages to display Go to “Menu” > “Setup” > “View setting” > if the audio languages are available. “Language”. Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”. Useful settings Switching the multi audio languages Each time you press 7 on the remote control unit, the...

  • Page 41: Useful Viewing Functions

    Useful viewing functions • When the amount of memory used for time shift reaches “Full” Time shift and the blue point is around the left edge of the bar (see o and p in the Counter section on page 40), you cannot operate some functions (F (Pause), S (Reverse), a (Jumping backwards This function enables you to pause the digital TV or by 10 seconds)). satellite programme you are watching and start watching • Time shift recording will stop in three hours. it again from the paused scene. This function is available • Time shift does not work for ATV, external inputs, data only for the 924/824 model series. broadcasts and radio broadcasts. • To release time shift, press READY, change the DTV/SAT channel, change “INPUT” or turn off the power of the TV. • Time shift will be released if no operations are performed for three hours. • Some functions do not work during time shift. • Time shift is not actually a recording function, so the recorded data is reset when you exit time shift. • Time shift does not work automatically, it starts only when you press READY. • The PIN is required when you use the buttons such as S, Press READY. J, a, b if you set the PIN and the items for “Parental • The TV starts temporary recording of the real time rating” except “None” are selected.
  • Page 42 Useful viewing functions Option Display information regarding time shift Auto input selection Channel display Channel information displays by pressing p on the remote You can choose whether or not to switch the input control unit. source automatically when receiving an AQUOS LINK or an Euro SCART compatible signal on the TV during time shift operations. Go to “Menu” > “Setup” > “Option” > “Time shift setting” > “Auto input selection”. Item Audio (ENG) STEREO Release time shift when receiving Video an AQUOS LINK or a Euro SCART Subtitle...

  • Page 43: Selecting The Picture Size

    Useful viewing functions Item (for SD [Standard-Definition] signals) Selecting the picture size Keeps the original aspect ratio in a full Normal screen display. Selecting the WSS picture size For 14:9 letterbox pictures. A thin side automatically bar appears on each side, and you may Zoom 14:9 also see bars on the top and bottom with some programmes. Option In this mode, the picture is stretched toward each side of the screen. The Panorama picture may appear similar to “Full” depending on broadcast signals. Full For 16:9 squeeze pictures. The “WSS” allows the TV to switch automatically among the different picture size. For 16:9 letterbox pictures. Bars may Cinema 16:9 appear on the top and bottom with Go to “Menu”...
  • Page 44 Useful viewing functions Selecting the recording picture Adjusting image position size manually Option Option Position REC picture size For adjusting a picture’s horizontal and vertical position. You can use this menu to set the appropriate picture size Go to “Menu” > “Setup” > “Option” > “Screen for viewing a 16:9 format TV programme on a 4:3 TV. effect” > “Position”. Go to “Menu” > “Setup” > “Option” > Item “Terminal setting”...

  • Page 45: Display Settings

    Useful viewing functions Display settings Time and title display Channel display View setting Time display You can display the channel information by pressing p on the remote control unit. Go to “Menu” > “Setup” > “View setting” > DTV mode ATV mode “Individual setting” > “Time display”. Time display Audio (ENG) STEREO Auto This function allows you to display the clock time in the Video...

  • Page 46: Other Useful Features

    Other useful features Setting when using external Skipping specified inputs devices Option Input source settings Input skip Option This setting allows you to skip the SCART, HDMI, RGB, ATV, DTV or SAT input on the input source selection Input select operation. Go to “Menu” > “Setup” > “Option” > “Input For setting the signal type of external equipment. skip”. Press b to select the input source for setting the input signal (“EXT 1”...

  • Page 47: Additional Features

    Other useful features Additional features Option Channel selecting effect Option Colour system This function shows a screen effect when choosing or changing channels. Go to “Menu” > “Setup” > “Option” > “Screen You can change the colour system to one that is effect” > “Channel selecting effect”. compatible with the image on the screen. Go to “Menu” > “Setup” > “Option” > “Colour Option system”.

  • Page 48: Connecting A Usb Device

    Other useful features Press c/d to select among “Photo mode”, Connecting a USB device “Music mode” or “Video mode”, and then press ;. Connect a USB device to the TV as shown below. NOTE • You do not need to select the drive/server in step 1 when there is only one drive in the connected USB device or there is only one Home network server connected to the TV. • 16 is the maximum number of drives that can be displayed in USB mode. • 10 is the maximum number of servers that can be displayed in Home network mode. • You cannot enter these modes when there is no server connected to the TV in Home network mode. Photo mode • The TV automatically switches to the USB mode when a USB Viewing thumbnails device is inserted in the USB terminal (this does not work when...
  • Page 49 Other useful features NOTE Viewing enlarged photos • Slide show BGM will be reset in the cases below. • Select “Reset all BGM” by pressing B during selecting music files. Buttons for enlarged photo display operation • Go back to the top menu. • Change the “INPUT”. Buttons Description • When there are invalid music files, the g mark will be displayed for the file. Go to the previous/next photo in the c/d (Cursor) • The displayed play time may differ slightly from the actual play same directory. time depending on the files. Return to the thumbnail selection Slide show screen. Rotate the photo by 90 degrees to Buttons for slide show operation R button the left.
  • Page 50 Other useful features NOTE Music mode • Instead of pressing buttons on the remote control unit, the operations above are also available on the screen with the operation panel. You can display this operation panel by pressing CONTROL on the remote control unit or select “Control (USB)” or “Control (Home network)” from “Option” > “Option for view”. Buttons for playing mode Buttons Description When selecting a video file: Play the video. When watching a video: Pause the video. Go to the beginning of a file by pressing a (Cursor) a once and the previous file by pressing * This screen image is for the USB mode. It may be slightly a twice. different in the Home network mode. Go to the next file. b (Cursor) Buttons for music mode USB mode: Reverse/fast forward a video. Buttons Description c/d (Cursor)

  • Page 51: Usb Device Compatibility

    Other useful features Home network server View setting compatibility DivX® setup This is the function to confirm your registration code. You Photo file format JPEG (DCF 2.0 compliant) need to register the code at www.divx.com. Music file format LPCM Go to “Menu” > “Setup” > “View setting” > MPEG2-TS Video file format “DivX® setup”. MPEG2-PS DivX® VOD registration NOTE You can find your registration code on this menu. You • Progressive format jpeg files are not supported.

  • Page 52: Connecting A Pc

    Connecting a PC After connecting Connecting a PC You must also set “RGB” from the “Input select” menu when selecting “EXT 3” from the “INPUT” menu (Pages 19 and 44). HDMI connection NOTE • The PC input terminals are DDC 2B-compatible. HDMI 1, 2, 3 or 4 • Refer to page 51 for a list of PC signals compatible with the TV.  Displaying a PC image on the screen HDMI-certified cable Selecting the picture size HDMI 2* You can select the picture size.
  • Page 53 Connecting a PC Adjusting the PC image Adjusting the PC image manually automatically Option Option Fine sync. Auto sync. Ordinarily you can easily adjust the picture as necessary to change image position using “Auto sync.”. In some This function enables the screen to be automatically cases, however, manual adjustment is needed to adjusted to its best possible condition when the analogue optimise the image. terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. Press b to select “EXT 3” from the “INPUT” menu, and then press ;. Press b to select “EXT 3”...

  • Page 54: Rs-232C Port Specifications

    Connecting a PC Command format RS-232C port specifications Eight ASCII codes +CR PC control of the TV C1 C2 C3 C4 P1 P2 P3 P4 • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input    signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed Command four digits: Command. The text of four playing. characters.
  • Page 55 Connecting a PC RS-232C command list CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER O W R POWER OFF (STANDBY) VOLUME VOLUME (0_60) SETTING POSITION H-POSITION (AV/PC) INPUT INPUT SWITCHING V-POSITION (AV/PC) SELECTION A (TOGGLE) CLOCK (0_180) TV (CHANNEL FIXED) PHASE (0_40) DTV (CHANNEL FIXED) WIDE MODE TOGGLE (AV) EXT 1_3 (1_3), HDMI 1_4 (4_7) NORMAL (AV) CHANNEL...

  • Page 56: Network Setup

    Network setup Wired connection overview Connecting to the network To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless. NOTE • If you choose a wired connection to the router, you need an ETHERNET cable (commercially available). • If you do not have a broadband internet connection, consult the store where you purchased your TV or ask your internet service provider or telephone company. • An Ethernet and wireless connection cannot be used at the same time. Use only one of the connection types. Router (commercially available) • A wireless LAN connection and performance cannot be ETHERNET cable (commercially available) guaranteed for all residential environments. In the following cases, the wireless LAN signal may be poor or drop, or the Network connection speed may become slower. _ W hen used in buildings made with concrete, reinforced steel, How to connect or metal _ When placed near objects that obstruct the signal...
  • Page 57 Search Wireless LAN router/access point Manual Setup Wireless LAN USB adapter (supplied) Network Press a/b to select “Push button”, and then NOTE press ;. • When using the SHARP wireless LAN USB adapter (supplied), • To establish the connection manually, select “PIN code”. Follow the on-screen instructions and the operation try to provide as much free space around the device for best manual of the router/access point. performance. • Make sure the firewalls in your network allows access to the TV wireless connection. • Operations cannot be guaranteed when used with access Push button points that do not have Wi-Fi® certification.

  • Page 58: Net Tv

    What is Net TV? Net TV offers internet service and websites tailored for your TV. Use the TV remote control unit to browse the Net TV internet pages. You can play movies, view pictures, listen to music, play games and much more. Net TV provides variety of services for each country. You can browse other countries’ service as well. If a service is unsuitable for children, you can lock it as needed. NOTE • Because Net TV is an online system, it can be modified over time to better serve its purpose. • Some Net TV services may be added, changed or discontinued after some time. • Some open internet websites may not be tailored for a TV screen and may not be displayed correctly. • You cannot download and save files nor install plug-ins. DISCLAIMERS • SHARP corporation bears no responsibility regarding the content and quality of the content provided by the content serve provider. Operations in Net TV Basic operation The illustrations on this page are for explanation purposes. They are subject to change without notice. Display the start page Press NET. • You can also display the Net TV start page with pressing b and select “NET” or go to “Menu” > “CH list” > “INPUT” > “NET”. NOTE • When switching to Net TV, a message which requests a software update may display in some cases.
  • Page 59 Net TV Control panel Displays an on-screen control panel for watching online contents. Select “Control panel”, and then press ;. Press a/b/c/d to select the desired operation, and then press ;. Press > to exit. Buttons Description Playback Stop Pause Fast forward Reverse NOTE • These operations can also be done by pressing the corresponding buttons (I/H/J/G) on the remote control unit. • The control panel may not function on some services. Reload Refreshes the page you are browsing. If an error occurs while loading the page, execute this function and reload it.
  • Page 60 Net TV DISCLAIMERS This product includes the Opera™ browser. • This product includes the fonts provided by Monotype Imaging Inc. • Monotype® is a trademark of Monotype Imaging Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. • Tioga™ is a trademark of Monotype Imaging Inc. and may be registered in certain jurisdictions. • Letter Gothic™ is a trademark of Monotype Imaging Inc. and may be registered in certain jurisdictions.

  • Page 61: Appendix

    Appendix Troubleshooting Problem Possible solution • No power. • Turn on (;) the MAIN POWER switch on the rear of the TV (Page 5). • Is the AC cord disconnected? • Check if you pressed <a on the TV. • The TV cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the TV after first turning off the power, or unplugging the AC cord and re-plugging it in after one or two minutes. • Remote control unit does not operate. • Are batteries inserted with polarity (e, f) aligned? • Are batteries worn out? (Replace with new batteries.) • Are you using it under strong or fluorescent lighting? • Is a fluorescent light illuminating to the remote control sensor? • Picture is cut off. • Is the image position correct? • Are screen mode adjustments (Wide mode) such as picture size made correctly? (Pages 41, 49 and 50) • Strange colour, light colour, or dark • Adjust the picture tone. colour, or colour misalignment. • Is the room too bright? The picture may look dark in a room that is too bright.

  • Page 62: Updating Your Tv Via Dvb-T

    Appendix Updating your TV via DVB-T Getting update information Ensure that your TV software version is always up to Information date. From time to time SHARP will make updated TV base software and DVB software available. Message list View setting When new software is detected, you can confirm the Download setup update information and download the software from “Message list”. Go to “Menu” > “Setup” > “Information” > Go to “Menu” > “Setup” > “View setting” > “Message list”.

  • Page 63: Updating Your Tv Via Usb/Network

    Appendix The TV displays a confirmation screen while Updating your TV via USB/ checking the data in the inserted USB device. network CAUTION • If the data is not compatible with the system, an error message appears on the screen. Repeat steps 2 and 3 after pressing Information Software update • When an error message displays, check to see if: • The USB device is inserted firmly. • The USB memory has two or more software update files. • No data for updating the system exists in the USB This function allows you to update to the latest software memory. via a USB device or network. • The software update file is broken.
  • Page 64 Appendix Information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Software developed by SHARP and open source software The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties. These include software components covered by a GNU General Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement. Obtaining source code Some of the open source software licensors require the distributor to provide the source code with the executable software components. GPL and LGPL include similar requirements. For information on obtaining the source code for the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the following website: http://www.sharp-eu.com/gpl/ We are unable to answer any questions about the source code for the open source software. The source code for the software components whose copyrights are held by SHARP is not distributed. Acknowledgements The following open source software components are included in this product: • linux kernel • busy box • glibc • zlib • libpng • libjpeg • mtd-utils • u-Boot • device-mapper • OpenSSL • DirectFB • cURL • c-ares • ezxml • dtoa • PolarSSL Bignum • libfreetype Software copyrights...
  • Page 65 Appendix...
  • Page 66 Appendix Warning regarding basic use Cautions regarding use in high and low temperature environments • When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the TV will recover when the temperature returns to normal. • Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction. Storage temperature: e 5 °C to e 35 °C. Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a certain frequency range (galvanic isolator, see EN 60728-11). NOTE • For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to television distribution systems.

  • Page 67: Specifications

    OUTPUT/Headphones RCA pin (AUDIO R/L)/Ø 3.5 mm jack (audio output) OSD language Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Italian, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Russian, Slovak, Slovene, Spanish, Swedish, Turkish, Ukrainian Power requirement AC 220_240 V, 50 Hz Power consumption (method 924 models 140 W (0.2 W standby* IEC62087) 824 models 127 W (0.2 W standby* 147 W (0.2 W standby* 814 models 127 W (0.2 W standby* 147 W (0.2 W standby* Weight 924 models 21.5 kg (without stand), 25.5 kg (with stand) 824 models 19.5 kg (without stand), 24.5 kg (without stand), 23.5 kg (with stand) 30.0 kg (with stand) 814 models 16.0 kg (without stand), 20.5 kg (without stand), 19.5 kg (with stand) 26.0 kg (with stand) Operating temperature 0 °C to e 40 °C The HDMI 2 and EXT 3 terminals can both use the same audio input terminal. Standby power consumption applies when the TV is set to not receive EPG data. The satellite channel’s frequency may vary according to satellites and antennas. • As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

  • Page 68: Specifications (Wireless Lan Usb Adapter)

    5725_5850 MHz) 11n 40 MHz 13 e/_ 1.5 dBm Rx sensitivity: (Typical) _84 dBm@11 Mbps _72 dBm@54 Mbps _64 dBm@64-QAM, 20 MHz channel spacing _61 dBm@64-QAM, 40 MHz channel spacing Current Consumption (5V DC) Tx: 440 mA Max Rx: 440 mA Max Permitted countries Austria, Belarus* , Belgium, Bulgaria, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Israel* , Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom, Russia* , Ukraine* 15 g Weight Dimensions 26.6 (W) g 73.3 (D) g 10.6 (H) mm Operating temperature 0 °C to e 40 °C Usage of the wireless LAN USB adapter is permitted for the countries listed. Usage of the wireless LAN USB adapter will be permitted for these country in near future although it has not been permitted yet. NOTE • This TV has received the following certifications when connected in an environment using the supplied SHARP wireless LAN adapter. _ Wi-Fi CERTIFIED™ (certification program from the Wi-Fi Alliance®) _ Wi-Fi Protected Setup™ (certification program from the Wi-Fi Alliance®) • When there is significant interference in the 2.4_GHz frequency (such as from other wireless LAN devices, Bluetooth® devices, 2.4_GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN access point that supports IEEE802.11a/n (5 GHz) and set the access point to transmit at 5 GHz. For setup details, see the operation manual of your access point. • Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings.

  • Page 69: Environmental Specifications

    Mounting the TV on a wall • This TV should be mounted on a wall only with the wall mount bracket and attachment* available from SHARP (Page 67). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
  • Page 70 Appendix Rating table for child lock Broadcasted rating User-adjusted rating Universal viewing — — — — — — — — — — — — — — ✔ Parental approval — — — — — — — — — — ✔ ✔...

  • Page 71: Dimensional Drawings

    Appendix Dimensional drawings ) : LC-46LE824E LC-46LE824RU LC-46LE824E LC-46LE824RU LC-46LU824E LC-46LU824RU LC-46LU824E LC-46LU824RU LC-40LE924E LC-40LE924RU LC-40LE824E LC-40LE824RU ] : LC-40LE924E LC-40LE924RU LC-40LU824E LC-40LU824RU LC-40LE824E LC-40LE824RU LC-40LU824E LC-40LU824RU ( 1127.0 ) / [ 993.0 ] : LC-46LE824E LC-46LE824RU ( 1127,0 ) / [ 993,0 ] LC-46LU824E LC-46LU824RU LC-40LE924E LC-40LE924RU ( 1023.4 ) / [ 890.6 ]...

  • Page 72: End Of Life Disposal

    Appendix End of life disposal...
  • Page 74 SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg SHARP CORPORATION http://www.sharp-eu.com Printed in Poland Gedruckt in Polen Imprimé en Pologne Stampato in Polonia Gedrukt in Polen Impreso en Polonia Impresso na Polónia Polonya’da basılmıştır TINS-E832WJZZ 10P08-PL-NG...

This manual is also suitable for:

Aquos lc-40le924eAquos lc-40le824eAquos lc-40le824ruAquos lc-40lu824eAquos lc-40lu824ruAquos lc-46le824e ... Show all

Table of Contents