Multimedia
Connecting the Video
To transmit video signals through the S-Video–out jack, you need
a standard S-Video cable, available from most computer or
electronics retailers.
Plug one end of the S-Video cable into the notebook S-Video–out
jack, illustrated below. Plug the other end of the cable into the
S-Video–in jack on the external device.
Displaying a Video Image
To display an image on the notebook display or a video device
display, both the notebook and the video device must be
turned on.
»
To switch the image between the notebook display and the
video device display, repeatedly press the
Pressing the
notebook display, any connected displays, and simultaneous
display.
For more information about
"Hotkeys"
4–6
hotkey switches the image among the
fn+f4
section in
Chapter 2, "Keyboard and Touchpad."
and other hotkeys, refer to the
fn+f4
Hardware and Software Guide
hotkey.
fn+f4