Frigidaire Gallery Series Use & Care Manual page 6

INSTALLATION
Cabinet Leveling & Refrigerator
Door Alignment (if necessary)
Guidelines for final positioning of refrigerator:
• All four corners of the cabinet must rest
firmly on the floor.
• The front should be slightly elevated to
ensure that doors close and seal properly.
• Doors should align with each other and
be level.
Most of these conditions can be met by raising
or lowering the adjustable anti-tip legs.
To level the cabinet using the anti-tip legs:
1 Slightly open freezer drawer.
2 Lower anti-tip legs until they are both
touching the floor. Use a pair of pliers to
adjust.
To raise unit: turn leg clockwise.
To lower unit: turn leg counterclockwise.
3 Ensure both doors are bind-free with their
seals touching the cabinet on all four sides
and that cabinet is stable.
To make final door height adjustments:
Door
Door
6
Anti-Tip
Legs
Door
Door
1 Open Custom-Flex Temp drawer to make
lower hinge visible.
2 Insert 6mm Allen
of the lower hinge.
To lower unit: turn adjustment screw
clockwise.
To raise unit: turn adjustment screw
counterclockwise.
Flipper Mullion
Adjust Flipper Mullion for proper connection
with the mullion guide by ensuring the flipper
mullion is folded and perpendicular to the fresh
food door. If the mullion guide is not in the
correct position, it could prevent the door from
closing completely.
wrench into the shaft
TM
Raise
WRONG