Switching The Screen Image; Decreasing Screen Brightness; Increasing Screen Brightness; Initiating Quicklock - HP Mini 110-1112 User Manual

When Sleep is initiated, your information is stored in memory, the screen is cleared, and power is
conserved. While the computer is in the Sleep state, the power light blinks.
The computer must be on before you can initiate Sleep.
NOTE: If a critical battery level occurs while the computer is in the Sleep state, the computer initiates
Hibernation and the information stored in memory is saved to the hard drive. The factory setting for
critical battery action is Hibernate, but this setting can be changed using Power Options in Windows
Control Panel.
To exit Sleep, briefly slide the power switch.
The function of the
Hibernation instead of Sleep.
NOTE: In all Windows operating system windows, references to the sleep button apply to the
hotkey.

Switching the screen image

Press fn+f2
if a monitor is connected to the computer, pressing
display to monitor display to simultaneous display on both the computer and the monitor.
NOTE: You must use a VGA cable (purchased separately) to connect an external display, such as a
monitor or projector, to the external monitor port on the computer.
Most external monitors receive video information from the computer using the external VGA video
standard. The
from the computer.
The following video transmission types, with examples of devices that use them, are supported by the
fn+f2 hotkey:
● LCD (device display)
● External VGA (most external monitors)

Decreasing screen brightness

Press fn+f3
incrementally.

Increasing screen brightness

Press fn+f4
incrementally.

Initiating QuickLock

Press fn+f6
QuickLock protects your information by displaying the operating system Log On window. While the Log
On window is displayed, the computer cannot be accessed until a Windows user password or a Windows
administrator password is entered.
NOTE: Before you can use QuickLock, you must set a Windows user password or a Windows
administrator password. For instructions, refer to Help and Support.
58 Chapter 9 Pointing devices and keyboard
fn+f1 hotkey can be changed. For example, you can set the
to switch the screen image among display devices connected to the system. For example,
fn+f2 hotkey can also alternate images among other devices receiving video information
to decrease screen brightness. Hold down the hotkey to decrease the brightness level
to increase screen brightness. Hold down the hotkey to increase the brightness level
to initiate the QuickLock security feature.
fn+f2 alternates the screen image from computer
fn+f1 hotkey to initiate
fn+f1