Power Connector Cable And Dc Bracket - HP Mini 210-2100 Maintenance And Service Manual

Power connector cable and DC bracket

Description
Power connector cable
DC bracket
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Service access cover (see
c. Hard drive (see
d. Keyboard (see
e. Top cover (see
f. Display assembly (see
g. System board (see
Remove the DC bracket and power connector cable:
1. Grasp the DC bracket (1), and then pull it up off the base enclosure.
2. Grasp the power connector (2), and then pull it up off the base enclosure.
66 Chapter 4 Removal and replacement procedures
Battery on page 33).
Service access cover on page
Hard drive on page
Keyboard on page 48).
Top cover on page 51).
Display assembly on page
System board on page
36).
39).
57).
63).
Spare part number
622329-001
634873-001