Using Voice-Activated Dialing; Programming A Voice Dial Tag To Your Phone - Sanyo Sprint SCP-5400 User Manual

Using Voice-Activated Dialing

In addition to PCS Voice Command
Voice Dial tag to automatically dial a phone number in your Contacts
directory. Your phone can store up to 30 Voice Dial tags.
To use a Voice Dial tag to call a phone number:
With the Flip Open:
1. Press
2. Follow the voice prompts and recite the entry's Voice Dial tag
into your phone's microphone.
With the Flip Closed:
1. Press and hold
2. Follow the voice prompts and recite the entry's Voice Dial tag.
Note:
To use the Voice Dial function, you must have stored entries for Voice Dial
(see "Programming a Voice Dial Tag to Your Phone" on this page).

Programming a Voice Dial Tag to Your Phone

To program a voice dial tag:
1. Press
2. Select Voice Services and press
3. Select Voice Dial and press
4. Select Program and press
5. The phone will prompt you to say the name you want to
program. Wait for the beep and then say the name.
6. Respond to the prompt by repeating the name after the beep.
7. Enter or highlight the entry (name) in the Contacts list and
press
8. Select the desired phone number and press
shows "Voice Dial Recorded".)
Note:
Record Voice Dial tags in a quiet environment and without the aid of an
accessory (for example, a headset or hands-free car kit).
Section 2: Understanding Your PCS Phone
2I: Using Your Phone's Voice Services
or briefly.
.
to access the main menu.
.
SM (see page 174), you can use a
.
.
.
. (The Display
120