Connection To A Tv Equipped With Rca Type Input Jack; Connection To An Audio System - Sharp DV-NC200 Operation Manual

Vcr/dvd combination
Table of Contents

Advertisement

Connection to a TV Equipped with RCA Type Input Jack

If your TV has RCA type audio and video input jacks, you may connect to EURO AV1 (TV) terminal through the SCART output adaptor (supplied).
When using this connection, do not connect a decoder to the EURO AV2 (DECODER) terminal of your VCR/DVD. Other equipment, such as a VCR
or camcoder, can be connected to EURO AV2 (DECODER) terminal. If the connected equipment has RCA type audio and video input jacks, use a
SCART input adaptor (commercially available).

Connection to an Audio System

Playing 2 channel audio
Connecting the VCR/DVD to audio equipment provides normal ste-
reo sound, plus powerful stereo sound enhanced by Dolby Digital 5.1
channel surround sound, DTS and MPEG audio.
AUDIO
Stereo system
VCR/DVD
ANALOG
AUDIO OUT
Setting
Connection
Connecting to Stereo System.
* To complete these settings, refer to pages 29, 31.
Hint
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
• ANALOG AUDIO OUT jacks are not available on the DTS audio.
C Digital Connection to Audio Equipment or MD deck without a Dolby
Digital Decoder
• Audio CD
Audio CDs can be transferred digitally to other equipment such as an MD
deck or DAT deck, play the disc as you would normally with the connection
shown above, right. Audio CDs recorded in the DTS format cannot be trans-
ferred digitally or via analogue.
• Some Audio CDs have a short silent section between musical tracks. When
sound from discs such as these is digitally recorded by connecting the VCR/
DVD directly to a digital recorder (such as an MD deck or DAT deck), the
music may be recorded continuously and track numbers may be lost.
• DVD
DVDs recorded in Dolby Digital 5.1 channel surround sound, DTS or MPEG
Audio cannot be connected digitally to external recording equipment such
as an MD deck or DAT deck.
It may be possible to record "Dolby Digital" or "MPEG" Audio via a digital
connection if the VCR/DVD output is set to "DPCM" (see page 31 "AUDIO
Setting"). Analogue recording is possible but not for DTS recorded audio.
Downloaded from:
http://www.usersmanualguide.com/
To EURO
AV1 ( TV )
terminal
SCART output
adaptor (supplied)
To VIDEO output
jack
(Yellow)
(White)
L
R
Analogue audio
input jacks
Audio cable
(supplied)
SETUP >
(QUICK) >
DOLBY DIGITAL
DTS
DPCM
OFF
To VIDEO input
jack
TV (with external input jacks)
To AUDIO output
jacks
(Red)
Playing Dolby Digital (5.1 channel audio),
Connecting an amplifier with a Dolby Digital/ DTS/ MPEG audio digi-
tal surround processor to your VCR/DVD's audio digital jack provides
richer and more powerful audio play. This connection is not possible
if the processor or amplifier to which you want to connect does not
have an audio digital input jack.
Dolby Digital decoder,
DTS decoder, MPEG decoder,
Connection
MPEG
DPCM
Connecting to a Dolby
Digital, DTS decoder or MPEG
decoder for Dolby Digital, DTS
or MPEG audio output.
Connecting to the other
equipment (an MD deck or
DAT deck etc.) without Dolby
Digital decoder.
* To complete these settings, refer to pages 29, 31.
Hint
• The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only use-
ful in DVD mode.
• The audio source on a disc in a Dolby Digital 5.1 channel sur-
round format cannot be recorded as digital sound by an MD or
DAT deck.
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
• By hooking this VCR/DVD up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital 5.1 channel sur-
round sound as heard in the movie theatres.
• By hooking this VCR/DVD up to the DTS decoder, you can enjoy
5.1 channel surround system which reproduces the original
sound as truthfully as possible. 5.1 channel surround system is
developed by the Digital Theater System Inc.
– 11 –
To AUDIO input
L
R
jacks
VIDEO
AUDIO
IN
IN
(Yellow)
(White)
(Red)
Video cable
Audio cable
(supplied)
(supplied)
DTS or MPEG audio
MD deck or DAT deck
DIGITAL
AUDIO OUT
SETUP >
Setting
DOLBY DIGITAL
BITSTREAM
DPCM
COAXIAL
Audio digital
input jack
Audio coaxial
digital cable
(commercially
available)
(QUICK) >
DTS
MPEG
OFF
DPCM
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-nc200ru

Table of Contents