Fig. 117: Attach Nut; Table 73: Tightening Torque (51007) With Spanner Holder - ABB HT613304 Operation Manual

Table of Contents

Advertisement

Operation Manual / A150-M56/66/57/67 - A155-M..
12 Dismantling and fitting, special tools for fastening strips / 12.1 Ap-
plication, special tools
Fig. 117: Attach nut
Product
A155-M
Table 73: Tightening torque (51007) with spanner holder
10. Screw nut (51007) loosely to the locking device (90162).
11. First position the cord end in the direction of the axis before winding up.
12. Wind up the cord 7-10 times around the nut and over the cord end.
13. Position the locking device (90162) with attached nut (51007) exactly onto the threaded
stud and press on.
14. Fit the nut (51007) to the set screw by pulling the cord.
15. Fit nuts (51007) with fixing washers (90165) and attached torque spanner (02). Observe
the tightening torque.
© Copyright 2022 ABB. All rights reserved.
Size
Tightening torque [Nm]
M16
HZTL4032_EN
70
Rev.S
February 2022

Advertisement

Table of Contents
loading

This manual is also suitable for:

A150-m66A150-m57A150-m67A155-m56A150-m56A155-m series

Table of Contents