Page 1
Please read this manual carefully before operating Please read this manual carefully before operating your set and retain for future reference. your set and rt for future reference. MODEL MODEL LAB5900RN LCS300AN/ LCS300AR LCS500UN/ LCS500UR P/NO : MFL60361548 P/NO : MFL63287305...
Table of Contents Safety Note Listening to the radio Auto search memory Front Panel Storing and recalling broadcast frequencies Basic operation To scan the preset stations Mute To tune in the preset stations Using the EQ Listening RDS broadcasting Adjusting the sound level Connecting USB device XDSS+ (Extreme Dynamic Sound System)
Safety Note CAUTION : This product uses a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than those specified herein CAUTION may result in hazardous radiation exposure.
Adjusting the sound level Basic Operation Press SEL repeatedly to select the mode you want to adjust from VOL(volume), BAL(left/right speaker), FAD(front/rear speaker) and SUB(Sub-woofer:optional). ON PLAYER To adjust sound quality, rotate PWR. 1. Turn the unit on. Note 2. Select a source. When EQ and XDSS+ is set to “Off”, you can also adjust the sound level 3.
Shuffle Listening to a CD Press or press and hold SHF on the player. Each files in the current selected ON PLAYER folder ( SHF) or all of the tracks/files (SHF) on the disc is played randomly. Press SHF again to cancel it. 1.
Listening to the radio Listening RDS broadcasting ON PLAYER ON PLAYER 1. Select a source to tuner. 1. Select a source to tuner. 2. Select a band. BAND 2. Select a band to FM. BAND 3. Auto seek. ?b- / +B? 3.
PI (Programme Identification) SOUND / MUTE Connecting an Auxiliary Equipment PI SOUND : If the sound of a station with different PI is heard intermittently, the receiver mutes the sound after 1 second. ON PLAYER PI MUTE : If the sound of a station with different PI is heard intermittently, the 1.
Troubleshooting Symptom Cause Correction General Power doesn’t turn on / Leads and connectors are not properly. Confirm once more that all connections are The unit doesn’t operate. correct. The fuse is blown. Rectify the problem that caused the fuse to blow, and then replace it.
Specifications General Output Power 53W x 4CH (Max.) Power Source DC 12V Speaker impedance 4Ω Ground System Negative Dimensions (W x H x D) 188 x 100 x 186 mm Net Weight 1.59 kg Tuner Frequency Range 87.5-107.9, 87.5-108 MHz S/N Ratio 55 dB Distortion...