Page 1
Register your product and get support at www.philips.com/welcome 200T1 220T1 230T1 USER MANUAL...
Page 2
Dear PHILIPS product owner: please do not remove product covering. Thank you for your confidence in PHILIPS. We’ll do everything in our power to keep you happy with your purchase for many years to come.
Important safety instructions Read before operating equipment Read and keep these instructions. • The appliance does not appear to operate normally or exhibits a marked change in performance; Heed all warnings. • The appliance has been dropped, or the enclosure Follow all instructions.
Page 4
Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.
Important Environmental care End of life directives - Recycling Product information Philips has paid a lot of attention to The model and serial number are on the rear of the producing an environmentally friendly product. TV and on the packaging.
Your LCD Monitor with HD/ Use the TV rear connectors to connect to the Full HD TV antenna and permanent devices such as a high- definition disc player or DVD player. This section gives you an overview of commonly- used TV controls and functions. Note For more information about connections, see Section 7 Connect devices.
Firmly pull the stand from the bottom of the Install the remote control batteries TV. Place both the stand and bolts in a secure location for future reinstallation. Open the battery cover on the back of the remote control. Insert the 2 batteries supplied. Make sure the Step 3 Connect cables + and - ends of the batteries line up correctly.
To connect the AC power cord Connect to a cable receiver box ANTENNA 75ΩANT 75ΩANT 75ΩANT Cable Receiver Box Locate the power connector at the back of the The location of the power connector varies A cable receiver box can be connected to the TV according to TV model.
Switch on and set up Watch TV This section helps you perform basic TV operations. Switch channels • Press a number (1 to 9) or press Switch your TV on/off or to standby your remote control. • Press PRE CH to return to the previously viewed To Switch the TV on TV channel.
Watch channels from a cable receiver Switch on the cable receiver box. The picture from your cable receiver box might appear automatically on your screen. Use the remote control of your cable receiver box to select channels. If the picture does not appear Press SOURCE repeatedly to select the connected cable receiver box and wait a few...
More about the installation Î ï Í Æ CURSOR BUTTONS To navigate through the menus. This section describes the advanced features of your VOL +/- Increases or decreases volume. CH / Remote control overview Switches to the next or previous channel. NUMBER BUTTONS Selects a channel, page or setting.
first be connected to your TV. Use install menu This section describe how to set the language and • Manual store store the channel of the TV. • Manual store : Activates auto search channel frequency or press number keys to show your desired channel frequency.
Summary of video settings Change Video settings The following picture settings can be configured. Change video settings Depending on the format of the picture source, some picture settings might not be available. This section describes how to adjust your picture settings.
60Hz, 75Hz, 72Hz 1400 x 900 60Hz, 70Hz 1600 x 900 60Hz 1600 x 900 is recommended resolution. 220T1: Toggle the " " button on the RC to select the format that is best fit in with your contents. Resolution Refresh rate...
Connect devices Connection overview 75ΩANT 75ΩANT SIDE AV Rear connectors Side connectors HDMI Headphones HDMI input connectors for DVD players, Stereo Mini Jack. digital receivers, game consoles and other high- definition devices. AUDIO L/R Audio L/R input connectors for composite and PC IN S-Video devices.
Select connection quality 7.2.3. S-Video - Good quality This section describes how you can enhance your An analogue connection, S-Video provides better audio visual experience by connecting your devices picture quality than composite video. When with the best possible connectors. connecting your device with S-Video, plug the S-Video cable to the S-Video connector on the side of the TV.
Connect a cable receiver box with Audio/Video Connect devices output This section describes how to connect a selection of devices with different connectors. Note that different types of connectors may be used to connect a device to your TV. The following sections describe examples only, other configurations are possible.
Page 20
Connect DVD player or other video devices with component video connectors L-AUDIO-R Accessory Device Equipped with 75ΩANT Component Video Outputs Connect DVD player with a HDMI connector 75ΩANT DVD Player Connect PC (monitor) with a VGA connector 75ΩANT Computer EN-19...
Glossary The ratio between the width and height of the TV picture on the screen. In a normal TV set the aspect ratio is 4 to 3 (4:3). The new aspect ratio in HDTV is 16:9 which Aspect Ratio resembles the aspect ratio in a movie theatre (Widescreen). New TV systems support both 4:3 and 16:9 aspect ratio and can automatically switch between them.
Troubleshooting Symptoms Possible cause What should you do 1. Press POWER at the side of the TV, or press . on the remote control. 2. Ensure the AC power cord is connected tightly to the TV power connector and to the power socket outlet.
Index Screen resolutions 15 Side connectors 16 Sleeptimer 15 AC power cord 9 Proset mode 14 Antenna 8 Switch on the TV 9 Batteries 8 Troubleshooting 21 Brightness 14 Volume 10 Cable 8 Care Environment 5 Wall mount 7 Screen 5 Watch TV 10 Channel Install 13...