Page 2
M8x20 T-shaped bolt Prepare the bolt and nut by yourself. The T-shaped bolt and nut can be purchased from Huawei. The following shows the bolt dimensions. Purchase the bolt based on the extruded aluminum profile. PV module M8x20 bolt assembly...
Page 3
Purchase the frame mounting bracket separately from Huawei. Install the PV module after the optimizer is installed. The front of the optimizer should be at least 10 mm away from the rear of the PV module.
Page 4
Common Exception Scenarios The probes are The sunlight is weak: reversely connected. 1.1 kΩ < R1 The measured value R2 is less than the resistance measured when the probes are correctly connected. The optimizer input The optimizer is not connected: output is connected 1.1 kΩ...
You can scan the QR FusionSolar App Quick Guide code to obtain Troubleshooting 1. Open the FusionSolar app, log in to intl.fusionsolar.huawei.co m using the installer account, choose My > Device Commissioning, and connect to the WLAN hotspot of the Optimizer status solar inverter.
Page 6
Replacing an Optimizer 1. Power off the solar inverter and remove 2. Install a new optimizer and correctly the faulty optimizer. connect its cables. 3. Power on the solar inverter. On the Device 4. On the Device Commissioning screen, Commissioning screen, choose choose Maintenance >...
Page 7
Carefully read this document prior to installation to get familiar with product information and safety precautions. Huawei shall not be liable for any consequence caused by violation of the storage, installation, and operation regulations specified in this document and the solar inverter user manual.
Page 8
Huawei Technologies Co., Ltd. Huawei Industrial Base, Bantian, Longgang Shenzhen 518129, People's Republic of China solar.huawei.com...