Asus PEB-10G User Manual page 17

Initiator Parameters
Key in the necessary parameters.
CComprehensive Configuration Management v7.10.31
Copyright (C) 2000-2014 Broadcom Corporation
All rights reserved.
IP Address
Subnet Mask
Default Gateway : 0.0.0.0
Primary DNS
Secondary DNS
iSCSI Name
CHAP ID
CHAP Secret
[Enter]:Enter New Value; [↑|↓]:Next Entry; [ESC]:Quit
Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7
1st / 2nd Target Parameters
Key in the necessary parameters.
Comprehensive Configuration Management v7.10.31
Copyright (C) 2000-2014 Broadcom Corporation
All rights reserved.
Connect
IP Address
ICP Port
Boot LUN
iSCSI Name
CHAP ID
CHAP Secret :
[←|→][Enter][Space]:Toggle Value; [↑|↓]:Next Entry; [ESC]:Quit
Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7
The iSCSI Name varies depending on the iSCSI target in use.
Secondary Device Parameters
Key in the necessary parameters.
Comprehensive Configuration Management v7.10.31
Copyright (C) 2000-2014 Broadcom Corporation
All rights reserved.
Secondary Device
Use Independent Target Portal : Disabled
Use Independent Target Name
Configure Secondary Device
[Enter]:Enter New Value; [↑|↓]:Next Entry; [ESC]:Quit
Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7
ASUS PEB-10G/57840-2T
Initiator Parameters
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: iqn.1995-05.com.broadcom.iscsiboot
:
:
Configure Initiator IP address
1st Target Parameters
: Disabled
: 192.168.110.1
: 3260
: 0
: iqn.iscsi4qtc1
:
Enable/Disable Target Establishment
Secondary Device Parameters
Select Secondary Device
: 00:00:00:00:00:00
: Disabled
: Invoke
2-7