Connecting The Power Cable - HP Compaq Presario,Presario Q2009 User Manual

Setting Up the Monitor

Connecting the Power Cable

1. Read the warning below.
WARNING: To reduce the risk of electric shock or damage to your equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the
■
power cord into a grounded (earthed) electrical outlet.
Be sure that the grounded power outlet you plug the power cord into is easily accessible to the operator and
■
located as close to the equipment as possible. A power cord should be routed so that it is not likely to be
walked on or pinched by items that are placed upon it or against it.
Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip
■
over them. Do not pull on a cord or cable.
See "Technical Specifications" (Appendix B) for additional information.
Connecting the power cable
2. Connect one end of the power cable to the monitor and the other end to a grounded electrical outlet.
WARNING: To prevent injury from electrical shock, you should do one of the following if a properly grounded
electrical outlet is not available: (1) You should use an electrical outlet adapter that provides proper grounding.
(2) You should have a properly grounded electrical outlet installed.
3-8 User's Guide